Camera not recognized

[dkryder]

has anything new been done with guvcview? has anything else come in the past 2 months that looks hopeful in getting the camera to work in linux?  i set up a image of rooted 5.1 android because i was interested in doing image comparisons with rpi camera ver 1 & 2 & rpi low light along with pine64 camera. i'm able to get images with the S5K4EC.  i have not seen any info on the flat flex cable used, i want to bring the camera about 12 inches off the board.  the cable looks to be 24pin. not sure of pitch . maybe .5mm is standard?

Here is the connector info: http://files.pine64.org/doc/datasheet/pi...0H=1.5.pdf

You also can fidn more camera info on http://wiki.pine64.org/index.php/Main_Page#Datasheet under camera section

thank you for the information. that provides some good data. the flat camera cable coming of the board has  01  on one side of the connector and  24  on the opposite side. that and a visual count leads me to think 24 pin so that is what i purchased as far as cable & connectors. was not able to find an "extender" so i'm going to fabricate one.