Lithion 3.7 volt PineA64 battery Model 9070120P

[MarkHaysHarris777]

With this setup (lennyraposo debian mate), the 2G PineA64 and motor speed controlled fan, usb receiver, LED GPIO lab, gps module (in the foreground) using as a full desktop PC mid to heavy loading,  I am getting six (6) hours of continuous use from the Pine64 battery model 9070120p  8000 mah lithion.  

This is fairly consistent between my LCD cb&dt Play Box running Android.

Nice!  That is a decent stretch.  Is it possible for this battery to power the multiport I2C as well?  I've not found info online to help on this issue.

I have the 2Gb board and this very battery but using it turns off the POT.

-a

when running on batt, you MUST move the 5v|batt jumper to BATT.  The jumper is next to the pine cone logo near the SD card slot.   While running on batt, the 5v needs to come from the on-board batt regulator and WILL NOT unless you move the jumper to BATT.