Kinda upset at the lack of response to GBe issues

[androsch]

I hope that I can reproduce the issue when your board arrives. But if two minor issues are combined (instable clock here and missing negotiation there) weird things might happen and maybe your board will work here without any problems. Let's see.

Received your developers board, it just ran out of the box with GbE as server:

[ ID] Interval Transfer Bandwidth
[ 5] 0.00-120.03 sec 2.50 GBytes 179 Mbits/sec sender
[ 5] 0.00-120.03 sec 2.50 GBytes 179 Mbits/sec receiver
[ 7] 0.00-120.03 sec 2.32 GBytes 166 Mbits/sec sender
[ 7] 0.00-120.03 sec 2.32 GBytes 166 Mbits/sec receiver
[ 9] 0.00-120.03 sec 2.04 GBytes 146 Mbits/sec sender
[ 9] 0.00-120.03 sec 2.04 GBytes 146 Mbits/sec receiver
[ 11] 0.00-120.03 sec 1.85 GBytes 133 Mbits/sec sender
[ 11] 0.00-120.03 sec 1.85 GBytes 133 Mbits/sec receiver
[SUM] 0.00-120.03 sec 8.71 GBytes 623 Mbits/sec sender
[SUM] 0.00-120.03 sec 8.71 GBytes 623 Mbits/sec receiver

So it's definite my board, which is unable to do GbE (at least as server), its nothing with my environment or my network or myself

Will try mitools and keep you all posted, tkaiser already mentioned this again to me, the FlowControl seems to be an issue now, i already played around with the TX/RX delays before, but that seemed to be the wrong part of it, maybe FC is the better issue.

Thanks to tkaiser for his help and support, we already agreed by PN he will not go on further in this forum with this and i understand his reasons completely.

Beiing still unsure how to go on, because my board is defective, but i don't want to bother too much with it and can (not too happy, but can) live with the 100mbps and also still hope for the 'big thing' to solve this issue. Ay help from my side is offered and any ideas regarding FC are very welcome.