08-06-2016, 08:54 PM
On my desk units I have the wifi cable standing pretty much straight up on one unit, and out to the front on the other unit. Within a couple meters of the router it doesn't make much difference.
On my Play Box, I removed the backing from the end of the antenna and 'stuck' it to the side of the box away from the board, and away from the batts (both the lith-ion batt, and the 3v RTC backup batt). The primary purpose of sticking it down is to prevent interference, but also I find it annoying to have stuff flopping around inside the box. I also have the end 'stuck' down in the center of the box, so that its away from my hands while I'm playing with it. The actual antenna is the small adhesive part on the end of the cable, and it should be mounted away from where your hands will hold the box.
On my Play Box, I removed the backing from the end of the antenna and 'stuck' it to the side of the box away from the board, and away from the batts (both the lith-ion batt, and the 3v RTC backup batt). The primary purpose of sticking it down is to prevent interference, but also I find it annoying to have stuff flopping around inside the box. I also have the end 'stuck' down in the center of the box, so that its away from my hands while I'm playing with it. The actual antenna is the small adhesive part on the end of the cable, and it should be mounted away from where your hands will hold the box.
marcushh777 
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
