LCD powers up but nothing is displayed?

[Danbrack]

I am having this same issue. I have re-downloaded the img a few times and loaded it onto the micro sd, I have a mac so I'm using apple pi baker. I put remix on my board just to make sure the board wasn't broken, it runs perfectly with remix. i have double checked all the connections, I am using the correct img. I will try to burn the image onto the sd card on a windows just to see if that will make a difference, but so far all I get is a blank screen, it is getting power though. Thanks for the help! So far I've been having a lot of fun with this project.

It turns out it was my lcd panel.  They sent me a replacement and I connected exactly as I did the first one I received and bam it booted up just fine And displayed everything and responded to touch.   It could be your panel.

I am having this same issue. I have re-downloaded the img a few times and loaded it onto the micro sd, I have a mac so I'm using apple pi baker. I put remix on my board just to make sure the board wasn't broken, it runs perfectly with remix. i have double checked all the connections, I am using the correct img. I will try to burn the image onto the sd card on a windows just to see if that will make a difference, but so far all I get is a blank screen, it is getting power though. Thanks for the help! So far I've been having a lot of fun with this project.

It turns out it was my lcd panel.  They sent me a replacement and I connected exactly as I did the first one I received and bam it booted up just fine And displayed everything and responded to touch.   It could be your panel.

ok is that something an admin can help me with or do I need to contact support?

Please advise which Android build that you are using when try out te LCD panel. Please make sure that you are using the Android build for LCD panel: http://wiki.pine64.org/index.php/Pine_A6...e_20160603

I am using the proper build. The 64gb lcd build with my 64gb sd card. I have been working on this for a few weeks now in my spare time and I tried everything and retried everything a few times over.