12-26-2025, 12:44 PM
The solution to downgrade mutter-common to 47.4-1_all helped.
However, probably it helps someone to read my booting errors.
when useing the(currently) latest stable 48.4-2 package, i get
"[ 2.301859] rockchip-drm display-subsystem: [drm:rockchip_drm_platform_probe [rockchipdrm]] *ERROR* No available vop found for display-subsystem."
I'll just dump the whole bootup log as well. Maybe it helps someone
However, probably it helps someone to read my booting errors.
when useing the(currently) latest stable 48.4-2 package, i get
"[ 2.301859] rockchip-drm display-subsystem: [drm:rockchip_drm_platform_probe [rockchipdrm]] *ERROR* No available vop found for display-subsystem."
I'll just dump the whole bootup log as well. Maybe it helps someone
Code:
DDR Version V1.10 20200218_resume
ln
start i2c rd
suspend_info:0x0, flag:0x20
LP4 MR12:0x5d,MR14:0x5d
LP4 MR12:0x5d,MR14:0x5d
LP4 MR12:0x5d,MR14:0x5d
LPDDR4X, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=4096MB
change to: 324MHz
PWRCTL:0x40,stat:0x303
minca:0x80,ck:0x80,ab:0x80,0x80, min_ck:0x0
PWRCTL:0x0,stat:0x1
get tdqqs2dq:361 ps
change to: 528MHz
PWRCTL:0x40,stat:0x303
vref_ca:00000071
minca:0x7b,ck:0x80,ab:0x80,0x80, min_ck:0x5
PWRCTL:0x0,stat:0x1
change to: 780MHz
PWRCTL:0x40,stat:0x303
vref_ca:00000071
minca:0x77,ck:0x80,ab:0x80,0x80, min_ck:0x9
PWRCTL:0x0,stat:0x1
change to: 1056MHz(final freq)
PWRCTL:0x40,stat:0x303
vref_ca:00000071
minca:0x77,ck:0x80,ab:0x80,0x80, min_ck:0x9
PWRCTL:0x0,stat:0x1
osreg:0x10010201,0x20000021
out
U-Boot SPL board init
U-Boot SPL 2017.09-gaaca6ffec1-211203 #zzz (Dec 03 2021 - 18:42:16)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 10
spl: mmc init failed with error: -95
Trying to boot from MMC1
No misc partition
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(91d912f568...) + OK
## Checking uboot 0x00a00000 ... sha256(87e1e455fd...) + OK
## Checking fdt 0x00b2a2e0 ... sha256(a75758ff17...) + OK
## Checking atf-2 0x00069000 ... sha256(d51631cf88...) + OK
## Checking atf-3 0xfdcd0000 ... sha256(3c902b0442...) + OK
## Checking atf-4 0xfdcc9000 ... sha256(5f1580bb97...) + OK
## Checking atf-5 0x00067000 ... sha256(36cebbc60c...) + OK
## Checking optee 0x08400000 ... sha256(4fcbcd3870...) + OK
Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
Total: 233.739 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-210-g4af361e4c:zwx
NOTICE: BL31: Built : 15:35:14, Jun 9 2022
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: pmu v1 is valid
INFO: dfs DDR fsp_param[0].freq_mhz= 1056MHz
INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: Feature: ultra suspend
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-723-gdcfdd61d0 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Wed Jun 7 09:43:57 CST 2023 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0xa00000
INFO: SPSR = 0x3c9
U-Boot 2017.09-ge0ec1df #runner (Oct 25 2024 - 09:52:07 +0000)
Model: Pine64 RK3566 Quartz64 Board PineNote modifications 4
PreSerial: 2, raw, 0xfe660000
DRAM: 3.7 GiB
Sysmem: init
Relocation Offset: ed2fd000, fdt: eb9f6fd8
dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
No misc partition
boot mode: None
FIT: No boot partition
No resource partition
Failed to load DTB
Failed to get kernel dtb, ret=-19
I2c0 speed: 100000Hz
vsel-gpios- not found! Error: -2
vdd_cpu init 900000 uV
PMIC: RK8170 (on=0x80, off=0x08)
vdd_logic init 900000 uV
vdd_gpu init 900000 uV
vcc_3v3 init 3300000 uV
vcca1v8_pmu init 1800000 uV
vccio_acodec init 3300000 uV
vcc3v3_pmu init 3300000 uV
vcc_1v8 init 1800000 uV
io-domain: OK
** Unable to use mmc 0:4 for loading the env **
Using default environment
osd_eink_probe start
I2c5 speed: 100000Hz
cyttsp5ub_probe start
cyttsp5_deassert_int returned: 0 0
launch app got size: 0 (expected 0)
Requesting HID descriptor
get hid descriptor got size: 32 (expected 32)
Request done
get sysinfo start
get sysinfo got size: 51 (expected 51)
get sysinfo end
Setting up the stdio support
enumerating keys:
KEY[0] = (322/672) (50/400) -> 103
KEY[1] = (322/672) (500/904) -> 28
KEY[2] = (322/672) (1004/1354) -> 108
done
Stdio setup complete
cyttsp5_deassert_int returned: 2 0
enabled
cyttsp5ub_probe finished
osd_eink_probe end
Model: Pine64 RK3566 Quartz64 Board PineNote modifications 4
uc_key: rk8xx_pwr
adc_probe
uc_key: volume up
Enable charge animation display
Exit charge: due to charger offline
I2c3 speed: 100000Hz
detected device with ID=66 (TPS65186r1p2)
rev_id=66
Eink: use pmic tps65185@68
eink update bootargs: ebc_pmic.vcom=1480
rkf: check format failed
rkf: failed to check RKF file format
[lut]: failed to input RKF waveform
[lut]: PVI waveform
ebc-dev is probed success!
Transmit uboot logo addr(0x116cb000) to kernel
Transmit kernel logo addr(0x10b82000) to kernel
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
apll 816000 KHz
dpll 528000 KHz
gpll 1188000 KHz
cpll 1000000 KHz
npll 1200000 KHz
vpll 24000 KHz
hpll 24000 KHz
ppll 200000 KHz
armclk 816000 KHz
aclk_bus 150000 KHz
pclk_bus 100000 KHz
aclk_top_high 300000 KHz
aclk_top_low 200000 KHz
hclk_top 150000 KHz
pclk_top 100000 KHz
aclk_perimid 300000 KHz
hclk_perimid 150000 KHz
pclk_pmu 100000 KHz
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'): 0
*** U-Boot Boot Menu *** Press UP/DOWN to move, ENTER to select Search for extlinux.conf on all partitions Boot OS1 (part 5) Boot OS2 (part 6) U-Boot console Hit any key to stop autoboot: 15 14 13 12 11 10 9 *** U-Boot Boot Menu *** Press UP/DOWN to move, ENTER to select Search for extlinux.conf on all partitions Boot OS1 (part 5) Boot OS2 (part 6) U-Boot consolelogo[0x2] is already loaded, just return!
Retrieving file: /boot/extlinux/extlinux.conf
2647 bytes read in 133 ms (18.6 KiB/s)
U-Boot menu
*** U-Boot Boot Menu *** Press UP/DOWN to move, ENTER to select1: Debian GNU/Linux trixie/sid 6.12.0-rc2-pinenote-202410092341-00187-g5392aa8e3808
2: Debian GNU/Linux trixie/sid 6.12.0-rc2-pinenote-202410092341-00187-g5392aa8e3808 (rescue target)
3: Debian GNU/Linux trixie/sid 6.3.10-pinenote-202308011945-ge6603de5834c
4: Debian GNU/Linux trixie/sid 6.3.10-pinenote-202308011945-ge6603de5834c (rescue target)
Enter choice: 1: Debian GNU/Linux trixie/sid 6.12.0-rc2-pinenote-202410092341-00187-g5392aa8e3808
Retrieving file: /boot/initrd.img-6.12.0-rc2-pinenote-202410092341-00187-g5392aa8e3808
24379112 bytes read in 243 ms (95.7 MiB/s)
Retrieving file: /boot/vmlinuz-6.12.0-rc2-pinenote-202410092341-00187-g5392aa8e3808
23321088 bytes read in 235 ms (94.6 MiB/s)
append: root=/dev/mmcblk0p5 ignore_loglevel rw rootwait earlycon console=tty0 console=ttyS2,1500000n8 fw_devlink=off quiet loglevel=3 systemd.show_status=auto rd.udev.log_level=3 splash plymouth.ignore-serial-consoles vt.global_cursor_default=0
Retrieving file: /usr/lib/linux-image-6.12.0-rc2-pinenote-202410092341-00187-g5392aa8e3808/rockchip/rk3566-pinenote-v1.2.dtb
61927 bytes read in 349 ms (172.9 KiB/s)
Fdt Ramdisk skip relocation
## Flattened Device Tree blob at 0x0a100000
Booting using the fdt blob at 0x0a100000
Using Device Tree in place at 000000000a100000, end 000000000a1121e6
can't found rockchip,drm-logo, use rockchip,fb-logo
WARNING: could not set reg FDT_ERR_BADOFFSET.
failed to reserve fb-loader-logo memory
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Total: 20916.704 ms
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.000000] Linux version 6.12.0-rc2-pinenote-202410092341-00187-g5392aa8e3808 (mweigand@orangepi5plus) (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #3 SMP Wed Oct 9 23:56:35 CST 2024
[ 0.000000] Machine model: Pine64 PineNote v1.2
[ 0.000000] printk: debug: ignoring loglevel setting.
[ 0.000000] earlycon: uart0 at MMIO32 0x00000000fe660000 (options '1500000n8')
[ 0.000000] printk: legacy bootconsole [uart0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x0000000009400000-0x00000000efffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
[ 0.000000] cma: Reserved 16 MiB at 0x00000000eaa00000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 30 pages/cpu s83736 r8192 d30952 u122880
[ 0.000000] pcpu-alloc: s83736 r8192 d30952 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: root=/dev/mmcblk0p5 ignore_loglevel rw rootwait earlycon console=tty0 console=ttyS2,1500000n8 fw_devlink=off quiet loglevel=3 systemd.show_status=auto rd.udev.log_level=3 splash plymouth.ignore-serial-consoles vt.global_cursor_default=0
[ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 978432
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 3MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 4MB
[ 0.000000] software IO TLB: mapped [mem 0x00000000ea000000-0x00000000ea400000] (4MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 39717 entries in 156 pages
[ 0.000000] ftrace: allocated 156 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 320 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: MBI range [296:319]
[ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001716] Console: colour dummy device 80x25
[ 0.002168] printk: legacy console [tty0] enabled
[ 0.003298] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.004327] pid_max: default: 32768 minimum: 301
[ 0.005002] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.005786] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.015057] rcu: Hierarchical SRCU implementation.
[ 0.015552] rcu: Max phase no-delay instances is 400.
[ 0.016436] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.017738] EFI services will not be available.
[ 0.018597] smp: Bringing up secondary CPUs ...
In n
n to
In n/aw l
In nIdsor
[ 0.021608] Detected VIPT I-cache on CPU1
[ 0.021718] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[ 0.021776] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 0.026705] Detected VIPT I-cache on CPU2
[ 0.026805] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[ 0.026849] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 0.031777] Detected VIPT I-cache on CPU3
[ 0.031869] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[ 0.031911] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 0.032083] smp: Brought up 1 node, 4 CPUs
[ 0.037673] SMP: Total of 4 processors activated.
[ 0.038136] CPU: All CPU(s) started at EL2
[ 0.038540] CPU features: detected: 32-bit EL0 Support
[ 0.039059] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.039897] CPU features: detected: Common not Private translations
[ 0.040522] CPU features: detected: CRC32 instructions
[ 0.041030] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.041607] CPU features: detected: LSE atomic instructions
[ 0.042155] CPU features: detected: Privileged Access Never
[ 0.042712] CPU features: detected: RAS Extension Support
[ 0.043245] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.044020] alternatives: applying system-wide alternatives
[ 0.049487] Memory: 3763512K/3913728K available (11392K kernel code, 2422K rwdata, 4128K rodata, 4736K init, 510K bss, 128456K reserved, 16384K cma-reserved)
[ 0.052721] devtmpfs: initialized
[ 0.064826] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.065854] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.067024] 26928 pages in range for non-PLT usage
[ 0.067036] 518448 pages in range for PLT usage
[ 0.067624] pinctrl core: initialized pinctrl subsystem
[ 0.069305] DMI not present or invalid.
[ 0.072920] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.075526] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.077496] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.079497] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.081841] thermal_sys: Registered thermal governor 'fair_share'
[ 0.081854] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.082481] thermal_sys: Registered thermal governor 'step_wise'
[ 0.083068] thermal_sys: Registered thermal governor 'user_space'
[ 0.083673] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.084360] cpuidle: using governor menu
[ 0.085566] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.086447] ASID allocator initialised with 65536 entries
[ 0.102484] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.103974] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
[ 0.105074] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.106328] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
[ 0.107363] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.108585] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
[ 0.109615] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.110830] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
[ 0.111857] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.113080] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
[ 0.117396] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.118113] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.118728] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.119407] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.120020] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.120698] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.121312] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.121985] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.123925] fbcon: Taking over console
[ 0.124769] iommu: Default domain type: Passthrough
[ 0.127091] usbcore: registered new interface driver usbfs
[ 0.127746] usbcore: registered new interface driver hub
[ 0.128315] usbcore: registered new device driver usb
[ 0.129016] pps_core: LinuxPPS API ver. 1 registered
[ 0.129509] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.130444] PTP clock support registered
[ 0.130976] scmi_core: SCMI protocol bus registered
[ 0.132695] vgaarb: loaded
[ 0.133444] clocksource: Switched to clocksource arch_sys_counter
[ 0.134567] VFS: Disk quotas dquot_6.6.0
[ 0.134993] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.149234] NET: Registered PF_INET protocol family
[ 0.150113] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.154877] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.155780] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.156576] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.157634] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.159549] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.160343] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.161114] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.162057] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.162689] PCI: CLS 0 bytes, default 64
[ 0.163373] Unpacking initramfs...
[ 0.167990] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.169943] SGI XFS with ACLs, security attributes, no debug enabled
[ 0.243980] NET: Registered PF_ALG protocol family
[ 0.245009] io scheduler bfq registered
[ 1.446080] Freeing initrd memory: 23804K
[ 1.449505] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.455593] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.456366] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 1.460763] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.461569] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 1.464187] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.468932] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 24, base_baud = 1500000) is a 16550A
[ 1.470058] serial serial0: tty port ttyS1 registered
[ 1.471861] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 25, base_baud = 1500000) is a 16550A
[ 1.473030] printk: legacy console [ttyS2] enabled
[ 1.473030] printk: legacy console [ttyS2] enabled
[ 1.473968] printk: legacy bootconsole [uart0] disabled
[ 1.473968] printk: legacy bootconsole [uart0] disabled
[ 1.479054] loop: module loaded
[ 1.495582] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[ 1.496319] i2c_dev: i2c /dev entries driver
[ 1.500624] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[ 1.548029] rk808-regulator rk808-regulator.1.auto: there is no dvs0 gpio
[ 1.548717] rk808-regulator rk808-regulator.1.auto: there is no dvs1 gpio
[ 1.594255] boost: Bringing 4700000uV into 5000000-5000000uV
[ 1.606073] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey.2.auto/input/input0
[ 1.619012] rk808-rtc rk808-rtc.3.auto: registered as rtc0
[ 1.622263] rk808-rtc rk808-rtc.3.auto: setting system clock to 2025-12-26T07:44:11 UTC (1766735051)
[ 1.625878] current-microamp 12500
[ 1.625897] checking 0 = 5000
[ 1.626228] checking 1 = 5750
[ 1.626573] checking 2 = 6500
[ 1.626881] checking 3 = 7250
[ 1.627187] checking 4 = 8000
[ 1.627514] checking 5 = 8750
[ 1.627820] checking 6 = 9500
[ 1.628122] checking 7 = 10250
[ 1.628470] checking 8 = 11000
[ 1.628785] checking 9 = 11750
[ 1.629097] checking 10 = 12500
[ 1.629438] current-microamp 12500
[ 1.629761] checking 0 = 5000
[ 1.630073] checking 1 = 5750
[ 1.630378] checking 2 = 6500
[ 1.630702] checking 3 = 7250
[ 1.631007] checking 4 = 8000
[ 1.631312] checking 5 = 8750
[ 1.631635] checking 6 = 9500
[ 1.631940] checking 7 = 10250
[ 1.632245] checking 8 = 11000
[ 1.632590] checking 9 = 11750
[ 1.632904] checking 10 = 12500
[ 1.635267] lm3630a: REG_BOOST, writing value: 35
[ 1.635974] lm3630a: current_index_leda: 10
[ 1.636449] lm3630a: current_index_ledb: 10
[ 1.642314] lm3630a_bl 3-0036: LM3630A backlight register OK.
[ 1.674945] sdhci: Secure Digital Host Controller Interface driver
[ 1.675566] sdhci: Copyright(c) Pierre Ossman
[ 1.675965] Synopsys Designware Multimedia Card Interface Driver
[ 1.677182] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.678213] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[ 1.678942] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[ 1.679053] arm-scmi arm-scmi.7.auto: Using scmi_smc_transport
[ 1.679560] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[ 1.679633] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 60,32 bit host data width,256 deep fifo
[ 1.680086] arm-scmi arm-scmi.7.auto: SCMI max-rx-timeout: 30ms
[ 1.682213] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
[ 1.683290] arm-scmi arm-scmi.7.auto: SCMI Notifications - Core Enabled.
[ 1.683996] arm-scmi arm-scmi.7.auto: Malformed reply - real_sz:8 calc_sz:4 (loop_num_ret:3)
[ 1.684802] arm-scmi arm-scmi.7.auto: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[ 1.687688] hid: raw HID events driver (C) Jiri Kosina
[ 1.688286] usbcore: registered new interface driver usbhid
[ 1.688823] usbhid: USB HID core driver
[ 1.691835] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available
[ 1.693186] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
[ 1.693760] mmc_host mmc1: card is non-removable.
[ 1.694366] NET: Registered PF_INET6 protocol family
[ 1.695160] watchdog: NMI not fully supported
[ 1.695607] watchdog: Hard watchdog permanently disabled
[ 1.696522] Segment Routing with IPv6
[ 1.696935] In-situ OAM (IOAM) with IPv6
[ 1.697387] NET: Registered PF_PACKET protocol family
[ 1.704230] registered taskstats version 1
[ 1.712190] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 1.756084] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 1.757559] clk: Disabling unused clocks
[ 1.759091] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[ 1.759823] PM: genpd: Disabling unused power domains
[ 1.760662] dw-apb-uart fe660000.serial: forbid DMA for kernel console
[ 1.786048] mmc0: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
[ 1.790174] Freeing unused kernel memory: 4736K
[ 1.790791] Run /init as init process
[ 1.791130] with arguments:
[ 1.791400] /init
[ 1.791625] splash
[ 1.791843] with environment:
[ 1.792125] HOME=/
[ 1.792338] TERM=linux
[ 1.847691] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[ 1.917549] mmc0: new HS200 MMC card at address 0001
[ 1.919467] mmcblk0: mmc0:0001 AKJ21X 115 GiB
[ 1.923035] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 1.924960] mmcblk0boot0: mmc0:0001 AKJ21X 4.00 MiB
[ 1.926462] mmcblk0boot1: mmc0:0001 AKJ21X 4.00 MiB
[ 1.927845] mmcblk0rpmb: mmc0:0001 AKJ21X 4.00 MiB, chardev (249:0)
[ 2.164506] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 219
[ 2.168580] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[ 2.301859] rockchip-drm display-subsystem: [drm:rockchip_drm_platform_probe [rockchipdrm]] *ERROR* No available vop found for display-subsystem.
[ 2.381079] panel-simple panel: supply power not found, using dummy regulator
[ 2.383589] panel-simple panel: Expected bpc in {6,8} but got: 4
[ 2.389061] rockchip_ebc_probe start
[ 2.440172] i2c_hid_of 1-0009: supply vddl not found, using dummy regulator
[ 2.463720] rockchip_ebc_probe start
[ 2.505596] tps65185 3-0068: detected TPS651851 r1p0
[ 2.548961] rockchip_ebc_probe start
[ 2.557782] rockchip-ebc fdec0000.ebc: [drm] Loaded 4-bit PVI waveform version 0x19
[ 2.560308] ebc: rockchip_ebc_plane_reset
[ 2.560776] [drm] Initialized rockchip-ebc 0.3.0 for fdec0000.ebc on minor 0
[ 2.653316] input: w9013 2D1F:0095 Stylus as /devices/platform/fe5a0000.i2c/i2c-1/1-0009/0018:2D1F:0095.0001/input/input2
[ 2.653636] input: w9013 2D1F:0095 as /devices/platform/fe5a0000.i2c/i2c-1/1-0009/0018:2D1F:0095.0001/input/input3
[ 2.653944] hid-generic 0018:2D1F:0095.0001: input,hidraw0: I2C HID v1.00 Device [w9013 2D1F:0095] on 1-0009
[ 2.696510] Console: switching to colour frame buffer device 234x87
[ 2.830083] rockchip-ebc fdec0000.ebc: [drm] fb0: rockchip-ebcdrm frame buffer device
[ 5.353444] random: crng init done
[ 6.199973] EXT4-fs (mmcblk0p5): mounted filesystem ec90b0a2-921c-4d63-9f34-122769365b5d r/w with ordered data mode. Quota mode: none.
[ 7.018106] systemd[1]: systemd 257.9-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 7.021162] systemd[1]: Detected architecture arm64.
[ 7.266003] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
[ 7.719002] systemd[1]: /etc/systemd/system/run_on_first_startup.service:22: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 7.733818] systemd[1]: Queued start job for default target graphical.target.
[ 7.762600] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 7.765166] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 7.767471] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 7.769199] systemd[1]: Created slice user.slice - User and Session Slice.
[ 7.770124] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 7.771292] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
[ 7.773084] systemd[1]: Expecting device dev-disk-by\x2dpartlabel-data.device - /dev/disk/by-partlabel/data...
[ 7.774014] systemd[1]: Expecting device dev-ttyS2.device - /dev/ttyS2...
[ 7.774832] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 7.775680] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 7.776367] systemd[1]: Reached target slices.target - Slice Units.
[ 7.777018] systemd[1]: Reached target swap.target - Swaps.
[ 7.780941] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 7.782107] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 7.783309] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 7.784513] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 7.785330] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 7.786641] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 7.788242] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 7.789313] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 7.793702] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 7.797654] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 7.802934] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[ 7.811908] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 7.820071] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 7.828591] systemd[1]: Mounting tmp.mount - Temporary Directory /tmp...
[ 7.839942] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 7.852963] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 7.870234] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 7.890090] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 7.898109] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 7.921195] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 7.924945] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 7.955056] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 7.969000] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 7.969105] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 7.977016] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 7.980744] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 7.993122] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 8.006113] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 8.027581] fuse: init (API version 7.41)
[ 8.031655] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 8.033108] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 8.037592] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[ 8.039746] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 8.041302] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 8.044110] systemd[1]: Mounted tmp.mount - Temporary Directory /tmp.
[ 8.046269] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 8.083674] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 8.085290] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 8.091633] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 8.093847] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 8.096318] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 8.098319] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 8.100658] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 8.102486] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 8.105019] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 8.107984] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 8.116824] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 8.123139] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 8.137175] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 8.138776] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 8.155971] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 8.169008] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 8.182964] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 8.184138] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.191980] systemd-journald[208]: Collecting audit messages is disabled.
[ 8.201759] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 8.222648] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 8.226214] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 8.287730] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 8.301983] systemd[1]: Started systemd-journald.service - Journal Service.
[ 8.428178] systemd-journald[208]: Received client request to flush runtime journal.
[ 9.099648] mousedev: PS/2 mouse device common for all mice
[ 9.217184] mc: Linux media interface: v0.10
[ 9.238936] videodev: Linux video capture interface: v2.00
[ 9.310929] panfrost fde60000.gpu: clock rate = 594000000
[ 9.311489] panfrost fde60000.gpu: bus_clock rate = 500000000
[ 9.360871] hantro-vpu fdea0000.video-codec: Adding to iommu group 0
[ 9.372573] hantro-vpu fdea0000.video-codec: registered rockchip,rk3568-vpu-dec as /dev/video0
[ 9.374657] panfrost fde60000.gpu: [drm:panfrost_devfreq_init [panfrost]] Failed to register cooling device
[ 9.375648] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
[ 9.376343] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
[ 9.377114] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
[ 9.378195] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
[ 9.423682] hantro-vpu fdee0000.video-codec: Adding to iommu group 1
[ 9.446251] hantro-vpu fdee0000.video-codec: registered rockchip,rk3568-vepu-enc as /dev/video1
[ 9.448037] [drm] Initialized panfrost 1.2.0 for fde60000.gpu on minor 1
[ 9.578798] cyttsp5 5-0024: supply vddio not found, using dummy regulator
[ 9.635689] input: adc-keys as /devices/platform/adc-keys/input/input6
[ 9.666293] iio iio:device2: interrupts on the falling edge or active low level
[ 9.667502] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 9.671185] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.pine64,pinenote-v1.2.bin failed with error -2
[ 9.749210] Bluetooth: Core ver 2.22
[ 9.749724] NET: Registered PF_BLUETOOTH protocol family
[ 9.750205] Bluetooth: HCI device and connection manager initialized
[ 9.750834] Bluetooth: HCI socket layer initialized
[ 9.751277] Bluetooth: L2CAP socket layer initialized
[ 9.751782] Bluetooth: SCO socket layer initialized
[ 9.798035] Bluetooth: HCI UART driver ver 2.3
[ 9.798550] Bluetooth: HCI UART protocol H4 registered
[ 9.803544] Bluetooth: HCI UART protocol Broadcom registered
[ 10.066060] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 10.067358] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[ 10.083082] EXT4-fs (mmcblk0p7): mounted filesystem dbcc013f-e93f-4800-bed6-7d08301e0ba2 r/w with ordered data mode. Quota mode: none.
[ 10.165199] Bluetooth: hci0: BCM: chip id 107
[ 10.165941] Bluetooth: hci0: BCM: features 0x2f
[ 10.167836] Bluetooth: hci0: BCM4345C0
[ 10.168206] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 10.170138] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch
[ 10.467879] input input5: Parameters are specified but the axis 53 is not set up
[ 10.468583] input input5: Parameters are specified but the axis 54 is not set up
[ 10.469238] input input5: Parameters are specified but the axis 58 is not set up
[ 10.470122] input: cyttsp5 as /devices/platform/fe5e0000.i2c/i2c-5/5-0024/input/input5
[ 10.933454] Bluetooth: hci0: BCM: features 0x2f
[ 10.936010] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 10.936610] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 11.117342] Bluetooth: MGMT ver 1.23
[ 12.158186] sh[529]: using "DejaVu Sans Mono-16", pixelsize=16.67 file=/usr/share/fonts/truetype/dejavu/DejaVuSansMono.ttf
pp
Debian GNU/Linux 13 pinenote ttyS2
pinenote login: