03-24-2025, 04:05 AM
For reference the Pinetab2 is 240x160mm and 9mm thick or 6.3" x 9.45" in inches.
I am sure there is a tablt of this size(I am not finding it exactly thought) though I found a cheap soft cover with bumper corners that is about 10mm too long.
I dont mind that the cutouts are in the wrong place, for my PinePhone pro I was happy to use an Otterbox and fill and drill/cut the camera, audio, and button holes to correct filling with ABS/acetone resin.
But I would really like to have an Otterbox style Military type tough cover to both keep my keyboard safe in the field when not needed and protect the tablet from drops to steel and stone floors.
For example the Huawei MatePad Pro 10.8 is 169x246x7,2mm so Pinetab2 needs padding in the X-9mm and Y-6mm dimensions.
I am sure there is a tablt of this size(I am not finding it exactly thought) though I found a cheap soft cover with bumper corners that is about 10mm too long.
I dont mind that the cutouts are in the wrong place, for my PinePhone pro I was happy to use an Otterbox and fill and drill/cut the camera, audio, and button holes to correct filling with ABS/acetone resin.
But I would really like to have an Otterbox style Military type tough cover to both keep my keyboard safe in the field when not needed and protect the tablet from drops to steel and stone floors.
For example the Huawei MatePad Pro 10.8 is 169x246x7,2mm so Pinetab2 needs padding in the X-9mm and Y-6mm dimensions.