08-24-2024, 07:12 AM
Hi, see the wiki page https://wiki.postmarketos.org/wiki/PINE6...inetab2%29
Quote:You can scan and try to connect to networks, but they seemingly all fail with an authentication error in dmesg regardless of whether they're secured or not.
One workaround is to either disable networkmanager or build with a user interface that does not install it (e.g. console or sway). You can either add `iw` in extra packages at build time or install it later using USB tethering. Then you can use the built-in `setup-interfaces` script to configure wlan0. DHCP does not run automatically in this configuration so you will need to either set a static IP during the setup or run `udhcpc -i wlan0` as root.