After reading all the hell people were going through getting their boards up, I decided to keep it simple and focused on getting my A64+ booting RemixOS without any additional modules. Just Ethernet, HDMI and power. I didn't even solder on the power and reset buttons yet. After a few hours of close reading of the forums (the wiki is next to useless), I was able to get RemixOS up and running. Hooray!
I opened a bunch of apps, watched a movie via Netflix and all seemed to be going well.
Then I tried to install a 4K video player from the Play Store and it failed claiming I wasn't authorized. On a hunch, I thought it might be related to the lack of location data, so then I tried installing the Pine WiFi/BT module and trouble started.
Predictably, there are zero instructions, but it seemed simple enough given it really only fits one way. So I popped the W/BT board on the header pins and plugged in the power. The Pine A64 logo immediately appeared on the screen and about 5 seconds later, the screen lost sync, went black, before the Pine logo appeared again. And again. And again. It loops indefinitely...
Anyone have a work around for this?
Thanks,
MMB
I opened a bunch of apps, watched a movie via Netflix and all seemed to be going well.
Then I tried to install a 4K video player from the Play Store and it failed claiming I wasn't authorized. On a hunch, I thought it might be related to the lack of location data, so then I tried installing the Pine WiFi/BT module and trouble started.
Predictably, there are zero instructions, but it seemed simple enough given it really only fits one way. So I popped the W/BT board on the header pins and plugged in the power. The Pine A64 logo immediately appeared on the screen and about 5 seconds later, the screen lost sync, went black, before the Pine logo appeared again. And again. And again. It loops indefinitely...
Anyone have a work around for this?
Thanks,
MMB
