bes2600 driver

[dekker]

# date Fri Nov  3 17:03:43 UTC 2023 [root@danctnix linux-pinetab2]# uname -a Linux danctnix 6.5.7-danctnix1-1-pinetab2 #1 SMP PREEMPT_DYNAMIC Sat, 14 Oct 2023 10:11:19 +0000 aarch64 GNU/Linux [root@danctnix linux-pinetab2]# git apply ../0001-Add-wake-for-WiFi.patch  error: patch failed: arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi:157 error: arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi: patch does not apply If I run:[root@danctnix linux-pinetab2]# git am --show-current-patch=diff --- .../arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi index a766f21bd6f8..cc17c791b9f0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi @@ -157,6 +157,15 @@ sdio_pwrseq: sdio-pwrseq {                reset-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;                post-power-on-delay-ms = <200>;        }; +       sdio_pwrkey: sdio-pwrkey { +               compatible = "mmc-pwrseq-simple"; +               clocks = <&rk817 1>; +               clock-names = "ext_clock"; +               pinctrl-names = "default"; +               pinctrl-0 = <&wifi_pwr_wake>; +               reset-gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; +               post-power-on-delay-ms = <500>; +       };          speaker_amp: speaker-amplifier {                compatible = "simple-audio-amplifier"; @@ -267,6 +276,8 @@ vcc_wl: vcc_wl {                regulator-min-microvolt = <3300000>;                regulator-max-microvolt = <3300000>;                vin-supply = <&vcc3v3_sys>; +               enable-active-high; +                  regulator-state-mem {                        regulator-off-in-suspend; @@ -845,6 +856,9 @@ host_wake_wl: host-wake-wl {                wifi_pwren: wifi-pwren {                        rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;                }; +               wifi_pwr_wake: wifi-pwr-wake{ +                       rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; +               };                  wifi_reg_on_h: wifi-reg-on-h {                        rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -921,7 +935,7 @@ &sdmmc1 {        cap-sd-highspeed;        cap-sdio-irq;        keep-power-in-suspend; -       mmc-pwrseq = <&sdio_pwrseq>; +       mmc-pwrseq = <&sdio_pwrseq &sdio_pwrkey>;        non-removable;        pinctrl-names = "default";        pinctrl-0 = <&sdmmc1_bus4 --  2.41.0 What can I do to get this patched and working?Thanks!Dekkerarjan1995 pid='119555' dateline='1693574466']I've created a more in-depth guide how you can get the bes2600 driver working right now.

Be aware: this is difficult and unstable (do this at your OWN RISK!). It will take quite some time. You have been warned!

Since the content is subject to change, I'm not placing the full instructions here directly, but instead, I'd suggest reading them in the repo itself:

https://gitlab.com/arjanvlek/bes2600/-/b...ds&plain=0

Feel free to let know if it worked!