08-28-2023, 05:31 AM
(This post was last modified: 08-28-2023, 05:39 AM by Kevin Kofler.)
GloDroid is more complicated to install than other operating systems. See the instructions at: https://github.com/GloDroidCommunity/pin...ing-images.
Also note that GloDroid does not have all the hardware working yet, especially on the PinePhone Pro, see https://github.com/GloDroidCommunity/pin...o/issues/1.
I would suggest first reinstalling Manjaro to the eMMC to hopefully get the phone working again. Then if that works, you can try out GloDroid on a microSD card. If it still will not boot from the SD card, you can try to reinstall Tow-Boot to the SPI from a Manjaro session. What you should also check on Manjaro is whether the volume buttons are physically working, because if those do not work properly, then it is no wonder holding them in Tow-Boot does not work.
Also note that GloDroid does not have all the hardware working yet, especially on the PinePhone Pro, see https://github.com/GloDroidCommunity/pin...o/issues/1.
I would suggest first reinstalling Manjaro to the eMMC to hopefully get the phone working again. Then if that works, you can try out GloDroid on a microSD card. If it still will not boot from the SD card, you can try to reinstall Tow-Boot to the SPI from a Manjaro session. What you should also check on Manjaro is whether the volume buttons are physically working, because if those do not work properly, then it is no wonder holding them in Tow-Boot does not work.
