02-12-2023, 01:01 PM
(This post was last modified: 02-12-2023, 02:34 PM by CounterPillow.)
I've finished porting all the boards to the newer u-boot yesterday and spent today getting device tree overlays to work. This will require using a Plebian specific device tree package so we can have DTBs with symbols in them. That means I won't tag a new release of Plebian quite yet, as I first want to set up a third party repository to distribute the package through.
Here's a video of me using a Bosch BMM150 Magnetometer connected to a Quartz64 Model B running Plebian, with the device added through device tree overlays: MP4 (H.264) Video, MP4 (AV1) Video
Once everything is in place and a new release is cut, I'll also make some example overlays at CounterPillow/overlay-examples for the Quartz64 devices. If you have any I²C/SPI devices in particular you'd like to know how to properly use through device tree overlays, let me know and I can look into acquiring them.
Here's a video of me using a Bosch BMM150 Magnetometer connected to a Quartz64 Model B running Plebian, with the device added through device tree overlays: MP4 (H.264) Video, MP4 (AV1) Video
Once everything is in place and a new release is cut, I'll also make some example overlays at CounterPillow/overlay-examples for the Quartz64 devices. If you have any I²C/SPI devices in particular you'd like to know how to properly use through device tree overlays, let me know and I can look into acquiring them.
Occasional Linux Kernel Contributor, Avid Wiki Updater, Ask Me About Quartz64
Open Hardware Quartz64 Model A TOSLink Adapter
Pi-bus GPIO Extender For ROCKPro64 And Quartz64 Model A
Plebian GNU/Linux