(06-03-2016, 03:38 PM)Dnode Wrote:(06-03-2016, 10:49 AM)Dup Wrote:(06-03-2016, 04:21 AM)Luke Wrote: Hi Dup
I got a few questions before I can suggest some trouble shooting:
1) What PSU and AWG cable are you using ? (does the touchscreen have dedicated power ? - I don't own one so I don't know)
2) What peripherals do you have connected during first boot - you say you pulled the Wifi/BT hat off - anything else plugged in?
3) Have you remembered to set 'Startup!' in Phoenix ?
A general note: after you boot a phoenix image, do note that it may take up-to 15 min for background processes to complete. Let it sit there after it boots for a while.
Its 5V 2A. Not sure on cable gauge but its fairly thick. Not a thin USB cable. I'm not even sure how I could even give the touchscreen separate power. It only has two ribbon cables that plug into the Pine.
No peripherals connected.
As stated, it was created with Startup
I had no idea it could take up to 15 min !!! Thats quite long. I suppose I will try to let it sit. That seems nuts.
What's the spec of your MicroSD card? It should be at minimum a Class 10.
Class 10 SanDisk. All of the other images I have tried have booted fine, (obviously not with the screen because the android is the only one that supports it).
Its actually a UHS 1 card.