07-06-2022, 11:12 AM
When I say I can boot any Linux or LE via SD card that would be with no emmc card in.
I also see nothing on the console on UART0 via pin 12/14 in minicomm at various baudrate. This /dev/ttyUSB0 device works fine with other devices Should I be using UART2?
I do have BAT1 open and I have read that might need to be closed.
Martin
I also see nothing on the console on UART0 via pin 12/14 in minicomm at various baudrate. This /dev/ttyUSB0 device works fine with other devices Should I be using UART2?
I do have BAT1 open and I have read that might need to be closed.
Martin