manjaro-phosh did make calls -- now nothing
#7
(03-07-2022, 12:01 PM)tckosvic Wrote:
(03-06-2022, 07:05 PM)Dragonborn Wrote:
(03-06-2022, 05:44 PM)tckosvic Wrote: The sim connection icon  is shown on the PPP front page at the top along with wireless, etc  I think there is connectivity but how good is not known.

Hardware issues could be the modem itself or the sim card holder as you suggested.  I have also suspected sim holder as a culprit which is addresssed by me in another thread.

tom kosvic
If you have the sim icon, then I assume that the modem itself *should* be okay.
If you can try to get a good picture of your sim and sd slot, you might be able to zoom in and see the pins better to check for broken contacts. 
Otherwise, we might want to find commands to run to check your modem status when the sim is inserted.

The possible causes of "no calls" as I see it are:  sim card holder hardware,  modem hardware, modem software.  I think sim card itself is eliminated as it is running in my old PP and can make and answer calls.  I thin OS is eliminated as I tried so many.  And, yes, I am looking for info on any modem hardware/software diagnostic processes but no answers.  So I am messing with PP again.  By the way it is much better now.
With PPP unworkable, I put sim card back in PP and installed manjaro-phosh beta 23.  Phone works in and out, sms works in and out.  mms works sometimes.  youtube video plays with audio. wifi gets internet through firefox.  that's all i ever use a cell phone for.
  Reply


Messages In This Thread
RE: manjaro-phosh did make calls -- now nothing - by tckosvic - 03-07-2022, 02:38 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  PPhonePro (Manjaro AMR + Phosh) with keyboard does not shutdown but restarts instead timt 0 1,265 08-11-2022, 09:30 AM
Last Post: timt
  PPP microphone not working for calls, is this normal? サーバント 4 3,863 04-10-2022, 05:35 PM
Last Post: mburns
  PPP did make calls -- now will not tckosvic 1 1,863 03-01-2022, 10:08 PM
Last Post: tckosvic

Forum Jump:


Users browsing this thread: 3 Guest(s)