firstly the earpiece hardware works fine, I can play audio through it.
I replaced the mainboard on my PPpro and at some point early on I lost the ability to hear or send audio on a telephone call.
I flashed themodemdistro firmware 8.0 via ./flashall and then ADSP V 01.003.01.003 and then DSP V 01.002.01.002
https://github.com/the-modem-distro/pine...LASHING.md
did both several times over the last days.
incoming and outgoing calls no luck; 2g, 3g, 4g
interesting ringtone doesn't work either
I have been flashing various images testing, I have flashed an image of the final from my old main board where phone audio mostly worked. I have been writing my old /home onto the new installs once I have them installed but I do a phone test first.
Rebooting as well as shutdown, rest, boot doesn't work either.
Data works, SMS works, DIalling works receiving works, just no audio except that 4g fails to make/take a call as usual which will be a problem once 2g and 3g shut down.
the audio line alsa/pipewire stuff gets complicated I am nut sure what to look for in the modem's dmsg
I am probably missing an obvious mistake, embarrass me please by showing me my error!
(edit)moved to ADSB 30.004 and 4g seems to be work, but that is always temporary, not the real problem of this post anyways
I replaced the mainboard on my PPpro and at some point early on I lost the ability to hear or send audio on a telephone call.
I flashed themodemdistro firmware 8.0 via ./flashall and then ADSP V 01.003.01.003 and then DSP V 01.002.01.002
https://github.com/the-modem-distro/pine...LASHING.md
did both several times over the last days.
incoming and outgoing calls no luck; 2g, 3g, 4g
interesting ringtone doesn't work either
I have been flashing various images testing, I have flashed an image of the final from my old main board where phone audio mostly worked. I have been writing my old /home onto the new installs once I have them installed but I do a phone test first.
Rebooting as well as shutdown, rest, boot doesn't work either.
Data works, SMS works, DIalling works receiving works, just no audio except that 4g fails to make/take a call as usual which will be a problem once 2g and 3g shut down.
the audio line alsa/pipewire stuff gets complicated I am nut sure what to look for in the modem's dmsg
I am probably missing an obvious mistake, embarrass me please by showing me my error!
(edit)moved to ADSB 30.004 and 4g seems to be work, but that is always temporary, not the real problem of this post anyways