pi case conversions for rock64

[sandradabo00]

Hello all,
I am looking for a case for rock64 board that is available in Europe. There does not seem to be any.
Has anyone managed to adapt an existing raspberry pi case for rock64 ? I would like to make a media center so it should be good looking (and cheap).
Any guides out there ?

Thanks

[tllim]

Hello all,
I am looking for a case for rock64 board that is available in Europe. There does not seem to be any.
Has anyone managed to adapt an existing raspberry pi case for rock64 ? I would like to make a media center so it should be good looking (and cheap).
Any guides out there ?

Thanks

Mostly you can use the Raspberry Pi case for ROCK64, just the power connector hole may need minor adjustment.

[MechWarrior]

Hello all,
I am looking for a case for rock64 board that is available in Europe. There does not seem to be any.
Has anyone managed to adapt an existing raspberry pi case for rock64 ? I would like to make a media center so it should be good looking (and cheap).
Any guides out there ?

Thanks

Mostly you can use the Raspberry Pi case for ROCK64, just the power connector hole may need minor adjustment.

The best cases I have found are from c4labs.net. I've ordered 3 of them for various boards and I must say that they are top notch. Give it a go, you will love it!

Sent from my SM-G925W8 using Tapatalk

[robix12]

if you are using a raspberry pi case can you access all the connectors including sdcard, audio, lan and usb? i have understood that for the power connector you have to make the hole bigger what about the power and reset? can you unsolder and put another switches?.

[jebivetar]

The best cases I have found are from c4labs.net.  I've ordered 3 of them for various boards and I must say that they are top notch.  Give it a go, you will love it!

Sent from my SM-G925W8 using Tapatalk

So much shilling

[killor]

Hello all,
I am looking for a case for rock64 board that is available in Europe. There does not seem to be any.
Has anyone managed to adapt an existing raspberry pi case for rock64 ? I would like to make a media center so it should be good looking (and cheap).
Any guides out there ?

Thanks

I make and sales wooden case for ROCK64 in EU AMAZON..

[thewonderer]

I purchased a $3 case from ebay for the raspberry pi 3, made a few mods with a drill and knife. Couldn't be happier.


'Clear Case for Raspberry Pi 3 Model B Quad Core.' is the one i found on ebay.com.au

[robix12]

can you show us some pictures please?

[thewonderer]

Hi this is the one, but you can get it from ebay also.

I don't have pics at present, but it was easy to do, a sharp knife and a 5mm drill bit for a couple of holes. Just put the rock64 in the case and marked where i needed to put some holes or make the gaps bigger. Good luck!

https://www.amazon.com/SB-Components-Ras...B00MQLB1N6