Yesterday, 08:45 AM
hello,
I recently purchased a pinecil v2 and provide power to it with a new 21v tool battery at the barrel jack and it has been working great. I have a spare battery always ready and it has never had a battery connected to it with less than 21 volts.
I used the pinecil and suddenly the pinecil would just drop in temp for no reason (that I know of anyway, I am new to the tool).
I found in the advanced settings the ability to do a factory reset, and did so. then the tool went back to working the way I prefer.
I like to just heat the tip to between 350 and 400, do my solder, then shut it off to prep for the next one. very basic. I have been cutting off the electric at the battery to shut it down because my efforts to shut it down with the pinecil were in vein. it would stay at 10 degrees celsius according to the display.
I looked through the settings and was overwhelmed by how much is in there. a high percent of that, are terms that I am unfamiliar with, so I'm worried that I will screw something up just by going there. it's a good thing I know how to do the factory reset.
I've checked youtube and google and can't find any documentation regarding the settings, the selections within, and hopefully explanations of them.
is there any documentation for the settings and/or menu's for the pinecil v2?
thanks.
I recently purchased a pinecil v2 and provide power to it with a new 21v tool battery at the barrel jack and it has been working great. I have a spare battery always ready and it has never had a battery connected to it with less than 21 volts.
I used the pinecil and suddenly the pinecil would just drop in temp for no reason (that I know of anyway, I am new to the tool).
I found in the advanced settings the ability to do a factory reset, and did so. then the tool went back to working the way I prefer.
I like to just heat the tip to between 350 and 400, do my solder, then shut it off to prep for the next one. very basic. I have been cutting off the electric at the battery to shut it down because my efforts to shut it down with the pinecil were in vein. it would stay at 10 degrees celsius according to the display.
I looked through the settings and was overwhelmed by how much is in there. a high percent of that, are terms that I am unfamiliar with, so I'm worried that I will screw something up just by going there. it's a good thing I know how to do the factory reset.
I've checked youtube and google and can't find any documentation regarding the settings, the selections within, and hopefully explanations of them.
is there any documentation for the settings and/or menu's for the pinecil v2?
thanks.