+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+--- Thread: EXP Reset pin (/showthread.php?tid=941)
EXP Reset pin - jproffer - 05-04-2016
Does the reset pin on the EXP connector (2x5 pins) need to be high or low to reset the board?
RE: EXP Reset pin - martinayotte - 05-04-2016
According to schematic, it is parallel with the reset switch SW2, and therefore should be bring momentarily to LOW.
RE: EXP Reset pin - jproffer - 05-04-2016
(05-04-2016, 08:25 PM)martinayotte Wrote: According to schematic, it is parallel with the reset switch SW2, and therefore should be bring momentarily to LOW.
ok. I didnt see that in the schematic, it was just open ended.
thanks