Noise with speaker - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120) +--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121) +--- Thread: Noise with speaker (/showthread.php?tid=14630) Pages:
1
2
|
Noise with speaker - jack1 - 08-10-2021 When I try to have a call on speaker, the other person hear loud noises (noise, not echo or reverb). Is it the same for you ? im using an os based on arch. If you want to replicate the bug, make a call and in alsamixer mute earphone, unmute speaker, enable mic1 boost, and see if the other side hear noise. Thanks. RE: Noise with speaker - vortex - 08-14-2021 (08-10-2021, 04:12 PM)jack1 Wrote: When I try to have a call on speaker, the other person hear loud noises (noise, not echo or reverb). Most likely, it audio coupling of the speaker to the microphone, with a lesser chance of being electrical coupling. Note that with the speaker muted, there could still be some noise (see https://forum.pine64.org/showthread.php?tid=13922) but with the speaker unmuted, the speaker is most likely the primary cause. RE: Noise with speaker - jack1 - 08-14-2021 (08-14-2021, 09:25 AM)vortex Wrote: Most likely, it audio coupling of the speaker to the microphone, with a lesser chance of being electrical coupling... Thanks. You have read when i wrote "noise, not echo or reverb" right ? its like the noise of a radio that has no signial... Important is if it happend only to me... RE: Noise with speaker - vortex - 08-14-2021 (08-14-2021, 04:08 PM)jack1 Wrote:(08-14-2021, 09:25 AM)vortex Wrote: Most likely, it audio coupling of the speaker to the microphone, with a lesser chance of being electrical coupling... If you get it when the speaker is muted, it is definite what was in the thread I linked (https://forum.pine64.org/showthread.php?tid=13922). If it is only there when the speaker is operating or is worse, then it is probably electrical coupling. That all said, there is a way to investigate it. If during a call, you record your phone's microphone to a file, download it to your computer, and look at a powerspectrum of it; there might be some clues. I wrote a convenient tool for the other thread that can help with the power spectrum part, which is pinephone_call_noise_investigation, that when given the recording as a WAV file will plot the spectrogram and optionally write it to a CSV. My most recent powerspectrum looked like If you get a frequency comb like this, then it is likely you have the same issue or a related one. RE: Noise with speaker - jack1 - 08-15-2021 thanks, ill try. Anyway it happend when the speaker is on and the 'mic1 boost' is active (max vol or > 0) (talking about alsa) RE: Noise with speaker - jack1 - 08-20-2021 @vortex I tryed your app ( u r a girl ? ) I left the default nperseg. The file is 41 seconds, 8khz Does it tell you something ? RE: Noise with speaker - vortex - 08-21-2021 (08-20-2021, 04:31 PM)jack1 Wrote: I left the default nperseg. The file is 41 seconds, 8khz There is no frequency comb (equally spaced spikes). Looks like broadband noise. (08-20-2021, 04:31 PM)jack1 Wrote: @vortex Seriously? RE: Noise with speaker - moonwalkers - 08-21-2021 (08-21-2021, 04:43 AM)vortex Wrote: Seriously? Believe me, you're not alone. RE: Noise with speaker - bcnaz - 08-22-2021 (08-10-2021, 04:12 PM)jack1 Wrote: When I try to have a call on speaker, the other person hear loud noises (noise, not echo or reverb). I am on Mobian nightly, one phone on the most recent nightly, and my daily phone is on an updated copy of a July release. When I have ether phone on speaker, they ' hear a noise on their end ' ... While It sounds really good at my end. I turned down the microphone volume in settings, and they say it does ' improve ', but the noise does not go away. When the speaker mode is off the sound is fine on both ends. RE: Noise with speaker - jack1 - 08-22-2021 @vortex I made another graph recording directly the from mic, also the wave; @bcnaz Look like the same bug ! I wonder how many has this ! I forgot, I also have the vibrator broken. Could be related ? a usb-board hardware problem ? |