PinePhone Pro working
#1
Thumbs Up 
Hi all,

I've just got around after months of inaction to doing the initial set up of my PinePhone Pro and installing the latest nightly (20220925) of Manjaro Phosh.

Install was fine, and flashing the emmc was fine. As to was installing updates from the UI - an improvement over the original PinePhone. One hardware oddity I thought I'd ask about here though...

I have the USB-C dongle from the original PinePhone. This worked fine for both a basic USB keyboard, HDMI to a monitor, and as a Network adapter on the old PinePhone.

On the PinePhone Pro though it appears that although the Pro is charging fine (at max 2 Amps too!), the USB keyboard is not receiving power and doesn't work, and the LAN connector although lighting up doesn't seem to be configured to be used by default on the PinePhone Pro. (No 'LAN' connection by default in the network settings, and no IP assigned).

Does anyone know the magic incantation to get the USB keyboard and the Network adapter working with the Pro please? I'd ideally like to be able to look cool on the train and edit code with a usb keyboard attached to the PinePhone Pro whilst placed on a stand I have! (random use case, I realise!). And Not to have to buy the keyboard case (although it does look cool to be fair).

This dongle is not mentioned on the PinePhone Pro wiki page alongside the other adapters specifically for the Pro, so I'm not sure if it's even meant to work.

I've not tested HDMI yet but plan to next weekend. (I'll probably need to do that to see all of the Advanced Network Configuration apps UI! LOL.)

All in all it's a little easier to get started with than the original PinePhone I think. The speed of the device feels infinitely better too - I'm really looking forward to trying it in anger. When I relocate my spare SIM I'll test it for calls and general use too and do a vlog episode on it for my channel. It'll be heavily caveated that this is not a mainstream device, don't worry!

Thanks for making the PinePhone Pro, and I'll report back with any further problems/solutions/suggestions as I find them!
  Reply
#2
Well, considering that they've advertised the convergence in the introduction video, it should work:

https://www.youtube.com/watch?v=wP2-6Z74W44&t=40s
Pinephone Braveheart
Pinephone Manjaro CE 3/32Gb
Pinephone Mobian CE 3/32Gb
Pinephone Pro Explorer Edition
  Reply
#3
(09-25-2022, 11:17 AM)adamfowleruk Wrote: Hi all,

I've just got around after months of inaction to doing the initial set up of my PinePhone Pro and installing the latest nightly (20220925) of Manjaro Phosh.

Install was fine, and flashing the emmc was fine. As to was installing updates from the UI - an improvement over the original PinePhone. One hardware oddity I thought I'd ask about here though...

I have the USB-C dongle from the original PinePhone. This worked fine for both a basic USB keyboard, HDMI to a monitor, and as a Network adapter on the old PinePhone.

On the PinePhone Pro though it appears that although the Pro is charging fine (at max 2 Amps too!), the USB keyboard is not receiving power and doesn't work, and the LAN connector although lighting up doesn't seem to be configured to be used by default on the PinePhone Pro. (No 'LAN' connection by default in the network settings, and no IP assigned).

Does anyone know the magic incantation to get the USB keyboard and the Network adapter working with the Pro please? I'd ideally like to be able to look cool on the train and edit code with a usb keyboard attached to the PinePhone Pro whilst placed on a stand I have! (random use case, I realise!). And Not to have to buy the keyboard case (although it does look cool to be fair).

This dongle is not mentioned on the PinePhone Pro wiki page alongside the other adapters specifically for the Pro, so I'm not sure if it's even meant to work.

I've not tested HDMI yet but plan to next weekend. (I'll probably need to do that to see all of the Advanced Network Configuration apps UI! LOL.)

All in all it's a little easier to get started with than the original PinePhone I think. The speed of the device feels infinitely better too - I'm really looking forward to trying it in anger. When I relocate my spare SIM I'll test it for calls and general use too and do a vlog episode on it for my channel. It'll be heavily caveated that this is not a mainstream device, don't worry!

Thanks for making the PinePhone Pro, and I'll report back with any further problems/solutions/suggestions as I find them!
I suggest to check different distribution (i.e. boot from micro SD )
on my side - 1 BT dongle (that connects wirelessly both  mouse and keuboard) and HDMI - works fine . 1 USB slot is not used )
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  PinePhone doesn't boot anymore lapin 3 259 09-13-2024, 10:09 AM
Last Post: lapin
  New PinePhone Pro fails... P. Siera 5 782 08-01-2024, 04:56 AM
Last Post: P. Siera
  A way to view or log the splash screen on Pinephone Pro running ArchLinux (Danctnix) PHLEMON 4 650 07-30-2024, 11:03 PM
Last Post: PHLEMON
  PinePhone Pro silver lining, it’s fast, real damn fast ashoka232 2 1,464 07-30-2024, 05:58 AM
Last Post: DrYak
  Camera stops working after resume from suspend jchw 3 1,253 07-30-2024, 05:52 AM
Last Post: DrYak
  Is my PinePhone Pro dead? jlioret 2 1,858 07-28-2024, 04:12 PM
Last Post: dchang0
  Pinephone Pro does not start with RE button pressed c0ssan 11 7,242 07-28-2024, 03:21 PM
Last Post: dchang0
  Will a Pinephone Pro (Explorer) work with TING wpeckham 8 4,021 07-28-2024, 03:04 PM
Last Post: dchang0
  Pinephone Pro: Determined To Make It (Drive-able) USeeks 3 655 07-20-2024, 10:11 AM
Last Post: mikehenson
  Show me your "portable" PinePhone Pro setup! Danct12 5 4,095 07-20-2024, 12:04 AM
Last Post: Emeliaee3

Forum Jump:


Users browsing this thread: 1 Guest(s)