I had this with Manjaru, a while back. I ended up having to re-install Manjaru.
FWIW, there's no reason to use the bypass cables, or assume it's a hardware problem at all.
Well, I actually just did this to my PBP, trying to install NetBSD. What I'll end up doing is disabling the eMMC (by the switch on the board) and booting to micro-sd, and then re-enabling the eMMC.
FWIW, there's no reason to use the bypass cables, or assume it's a hardware problem at all.
Well, I actually just did this to my PBP, trying to install NetBSD. What I'll end up doing is disabling the eMMC (by the switch on the board) and booting to micro-sd, and then re-enabling the eMMC.
:wq
[ SRA accepts you ]
[ SRA accepts you ]