Hi,
I'm getting:
[035.180]: upgrade progress 100% 122659832/122437088
[035.180]: send finished
[035.180]: <log value="Finished sector address 0"/>
[035.181]: <response value="ACK" rawmode="false" />
[035.181]: <power value="reset" />
[035.181]: <log value="Inside handlePower() - Requested POWER_RESET"/>
[035.181]: <response value="ACK" />
[036.188]: inf[0] ep_in -1/1024, errno = 108 (Cannot send after transport endpoint shutdown)
[036.188]: qusb_noblock_read read=-1, errno: 108 (Cannot send after transport endpoint shutdown)
[036.188]: qusb_noblock_read cur=0, min_size=1
[036.188]: firehose_protocol.c fh_recv_cmd 327 fail
[036.188]: THE TOTAL DOWNLOAD TIME IS 30.851 s
[036.188]: Upgrade module successfully.
When I do 'dmesg | grep -i modem' it doesn't show me the new firmware version before or after reboot. Is there another way to check this? @as400 mentioned having to change the log level?
I'm just worried about the '[036.188]: firehose_protocol.c fh_recv_cmd 327 fail' even though it says 'Upgrade module successfully'.
Thanks
I'm getting:
[035.180]: upgrade progress 100% 122659832/122437088
[035.180]: send finished
[035.180]: <log value="Finished sector address 0"/>
[035.181]: <response value="ACK" rawmode="false" />
[035.181]: <power value="reset" />
[035.181]: <log value="Inside handlePower() - Requested POWER_RESET"/>
[035.181]: <response value="ACK" />
[036.188]: inf[0] ep_in -1/1024, errno = 108 (Cannot send after transport endpoint shutdown)
[036.188]: qusb_noblock_read read=-1, errno: 108 (Cannot send after transport endpoint shutdown)
[036.188]: qusb_noblock_read cur=0, min_size=1
[036.188]: firehose_protocol.c fh_recv_cmd 327 fail
[036.188]: THE TOTAL DOWNLOAD TIME IS 30.851 s
[036.188]: Upgrade module successfully.
When I do 'dmesg | grep -i modem' it doesn't show me the new firmware version before or after reboot. Is there another way to check this? @as400 mentioned having to change the log level?
I'm just worried about the '[036.188]: firehose_protocol.c fh_recv_cmd 327 fail' even though it says 'Upgrade module successfully'.
Thanks