Prevent problems with overheating

[jojuma]

Hello,

in the mobian section, there's a thread about overheating and how to edit thermal zone values.
I want to apply lower values to the thermal zones of postmarketos, too.

The current values are:

Code:

pine64-pinephone:~$ grep . /sys/class/thermal/thermal_zone0/trip_point_*_temp
/sys/class/thermal/thermal_zone0/trip_point_0_temp:75000
/sys/class/thermal/thermal_zone0/trip_point_1_temp:90000
/sys/class/thermal/thermal_zone0/trip_point_2_temp:110000

On mobian, the values can be changed like this:

Code:

echo -e "class/thermal/thermal_zone0/trip_point_0_temp = 40000\nclass/thermal/thermal_zone0/trip_point_1_temp = 50000\nclass/thermal/thermal_zone0/trip_point_2_temp = 60000" | sudo tee /etc/sysfs.d/throttling.conf

Since there is no file /etc/sysfs.d/throttling.conf on the PMOS system I'd like to know, where to write these values. Or does this file need to be created?

Thanks!