Kinda upset at the lack of response to GBe issues

[longsleep]

I received the board from @androsch, plugged it in, tested - works fine.

iperf2 pine64 is server

Code:

root@pine64:~# iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[  4] local 192.168.1.29 port 5001 connected with 192.168.1.232 port 40359
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-10.0 sec   320 MBytes   267 Mbits/sec

iperf2 pine64 is client

Code:

root@pine64:~# iperf -c 192.168.1.232
------------------------------------------------------------
Client connecting to 192.168.1.232, TCP port 5001
TCP window size: 22.5 KByte (default)
------------------------------------------------------------
[  3] local 192.168.1.29 port 39981 connected with 192.168.1.232 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec   813 MBytes   682 Mbits/sec

So no problem of the board itself and this is probably true for all the other non working 1000M reports here. The reason is something else / external to the Pine64. The switch, the cable, the psu, and a combination of those together with the Pine64. So its up to you folks which have the issue to find out what triggers it (start by replacing the switch).