I have encountered a new issue. Every so often my pine will crash to a near black screen. The lights are all still on but I can't get a response to anything I try. It happens often while streaming video on kodi. Sometimes it just happens when I am not running any programs. Any suggestions as to what might be the issue?
Two things come to mind: 1) PSU / AWG of cable 2) Faulty SD card
A little bit more info about the two above would help
Same problem here with the latest release.
1) Fresh install done 30min ago
2) PSU that came with my Pine
3) Samsung EVO plus 64GB micro SD
4) WiFi module that came with my Pine
Everything is new and tested.
Here is what it says on the cable.
AWM 21445 80°C 30V VW-1 RFT (s) HX NT non-pvc non-p
This doesn't mean a whole lot to me but from my Google research it seems as though the cable should support 2.1 amps. So unless the cable has degraded it should be fine.
I have the same issue, my SD card is 100% NOT faulty and my usb wire is 20awg used for charging ecigarettes so certainly works for high powered devices