+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: General Discussion on ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=99)
+--- Thread: RockPro 64 MIPI Pinout (/showthread.php?tid=9907)
RockPro 64 MIPI Pinout - carbotaniuman - 05-20-2020
Is there a pinout for the RockPro 64 MIPI-CSI connector? Is this connector standardized across boards such as the Pi 3/4 and the Jetson Nano?
RE: RockPro 64 MIPI Pinout - dukla2000 - 05-20-2020
(05-20-2020, 08:42 AM)carbotaniuman Wrote: Is there a pinout for the RockPro 64 MIPI-CSI connector? Is this connector standardized across boards such as the Pi 3/4 and the Jetson Nano?
All the schematics are linked from the wiki, which also identifies all the RockPro64 connectors. No idea any pin compatibility - the physical connector is standard.
RE: RockPro 64 MIPI Pinout - carbotaniuman - 05-20-2020
I see the schematic. Do you happen to know what voltage the SCL and SDA lines (on the MIPI CSI port) operate at?
RE: RockPro 64 MIPI Pinout - dukla2000 - 05-21-2020
(05-20-2020, 08:39 PM)carbotaniuman Wrote: I see the schematic. Do you happen to know what voltage the SCL and SDA lines (on the MIPI CSI port) operate at?
Nope sorry. And due to lockdown my RockPro and multimeter are in different locations.