+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: UBPorts on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=125)
+---- Thread: phone working on UT-#246 (/showthread.php?tid=9393)
phone working on UT-#246 - colin hodsdon - 03-09-2020
big improvements ,from UT-#244 and 246
texts work
phone calls working (decent sound )
#246 (Mar 9, 2020 7:49:36 AM)
- Use a lighter wallpaper for pine — Marius Gripsgard / gitlab
- Make sure to set correct modem audio config — Marius Gripsgard / gitlab
- [pinetab] set 'tablet' machine type — nekit1000 / gitlab
- Add debug mode to selected images — Marius Gripsgard / gitlab
- Add audio, modem and voicecall fixes — Marius Gripsgard / gitlab
RE: phone working on UT-#246 - antiX-Dave - 03-14-2020
What is needing to be done to make the phone calls work; should it work automatically? do the bits for the modem need to be different than +QDAI: 1,0,0,1,0,1,1,1?
I do not appear to have a connection instead always getting call failed... Previously I could dial and connect but had no audio throughput.
At the moment I do have sms, mms, and data working without too much fuss.
RE: phone working on UT-#246 - bcnaz - 03-14-2020
I am using a AT&T sim card from a Google phone, I have inconsistently been able to make out-going calls, usually on the third try.
( first two try's it says 'call failed' )
Sometimes the audio is crystal clear, sometimes not very clear, sometimes no audio at all, but it seems to stay connected until I disconnect it.
Calling in from another phone, it usually just pops up "call failed" no ring or anything else.
I was able to connect my laptop with the phones 'Hot Spot' for a few minutes, several times.
BUT, It gives an AT&T message that I "do not have Data Services" ... ? BUT I DO HAVE DATA SERVICE... !
The same card does work for Data service in the Google phone.
The wifi works Super, surfing and watching YouTube, the browser does need some work on screen 'Scaling' but otherwise works Great,
That is until I attempt to use the 'HotSpot', after using the hotspot, the wifi is Broke until I re-flash the SD card.
( Debian/Phosh has the same problem )