+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: PostmarketOS on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=124)
+---- Thread: PostMarketOs Plasma on PinePhone (/showthread.php?tid=8657)
PostMarketOs Plasma on PinePhone - dannyzadok - 01-01-2020
Hello
I need help. I have received my first PinePhone device (not dev-board).
I've used pmbootstrap to create and burn an image on a SD card for the device.
I selected pinephone as the vendor and pinephone as the codename.
I tried the following UI options: Phosh, plasma-mobile, hildon.
In all three cases, the phone powers up, and the PostMarketOS Logo Splash comes up, and it is suck there.
In the up left side of the screen, a console login prompts appears.
But, nothing else happens.
Can someone help me to figure out what I am doing wrong?
Thanks
Danny
RE: PostMarketOs Plasma on PinePhone - dukla2000 - 01-01-2020
I would recommend working on the postmarketOS github as per the wiki.
But please update the wiki if you find out a better/different way.
RE: PostMarketOs Plasma on PinePhone - MartijnBraam - 01-02-2020
If you have the phone connected to your computer while it's booting it should show up as a network interface. You can SSH in to the phone with username@172.16.42.1 (the username you've chosen in pmbootstrap). From there you should be able to get the kernel log with dmesg and the userspace logs with logread.
RE: PostMarketOs Plasma on PinePhone - realrichardsharpe@gmail.com - 02-11-2020
(01-02-2020, 02:50 PM)MartijnBraam Wrote: If you have the phone connected to your computer while it's booting it should show up as a network interface. You can SSH in to the phone with username@172.16.42.1 (the username you've chosen in pmbootstrap). From there you should be able to get the kernel log with dmesg and the userspace logs with logread.
Hmmm, it's not showing up on Windows. Is a special driver needed?
I can see usb0 on the phone with that IP address, but Windows 10 does not seem to recognize it.