+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: General Discussion on PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=3)
+--- Thread: display problem (/showthread.php?tid=784)
display problem - florianl - 04-26-2016
i powering up the pine 64 2gb and nothing in the screen . i tried different screen and cables and none of them getting singles
i Installed the software like he did in the video and noting happening when i turn it on
https://www.youtube.com/watch?v=TjJ62s5DxPc&feature=youtu.be
RE: display problem - Darkover - 04-26-2016
Pine64 2GB is pushing 1080p/60Hz signal (I don't understand this very well), you need monitor which is able to handle it. If your monitor is for example 1050p/60Hz native, it won't power up.
You can try it using HD TV if you have some (1080p).
RE: display problem - shepscrook - 04-27-2016
You also pretty much HAVE to use an HDMI cable. You can't use an HDMI to DVI adapter. I found that out the fun way as well.
RE: display problem - baryluk - 04-27-2016
Just to report that I successfully used HDMI to DVI adapter on Pine 2GB without any issue. Monitor is Crossover 3020mdp (2560x1600). Unfortunetly I do not know the model of the adapter.
RE: display problem - KE4JGX - 04-27-2016
(04-27-2016, 04:45 PM)baryluk Wrote: Just to report that I successfully used HDMI to DVI adapter on Pine 2GB without any issue. Monitor is Crossover 3020mdp (2560x1600). Unfortunetly I do not know the model of the adapter.
I too sucessfully used a HDMI to DVI adapter BUT the blacks appear as purple... I used it only for initial testing.
RE: display problem - Luke - 04-29-2016
(04-27-2016, 08:13 PM)KE4JGX Wrote:(04-27-2016, 04:45 PM)baryluk Wrote: Just to report that I successfully used HDMI to DVI adapter on Pine 2GB without any issue. Monitor is Crossover 3020mdp (2560x1600). Unfortunetly I do not know the model of the adapter.
I too sucessfully used a HDMI to DVI adapter BUT the blacks appear as purple... I used it only for initial testing.
Hey, please see this thread I've created as an ad-hoc solution to this problem: http://forum.pine64.org/showthread.php?tid=827
What type of cable/adapter are you using ?