PINE64
Reboot problem on latest ayufan and 4.4 - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: Linux on RockPro64 (https://forum.pine64.org/forumdisplay.php?fid=101)
+--- Thread: Reboot problem on latest ayufan and 4.4 (/showthread.php?tid=7220)

Reboot problem on latest ayufan and 4.4 - /dev/null - 03-02-2019

Reboot problem mentioned "Fixed" in 0.7.11 ( https://forum.pine64.org/showthread.php?tid=6706&highlight=0.7.11+reboot ) seems back again.

100% repeatable "sudo reboot" leads to hang on next kernel boot on both 0.7.11 and 0.7.12 pre-release.

System hangs after

Code:
[    0.002074] Console: colour dummy device 80x25
[    0.002493] console [tty0] enabled
[    0.002815] bootconsole [uart0] disabled
lines right before

Code:
[    0.003210] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
line that appears next after cold boot.

mrfixit2001 kernel reboots fine as well as ayufan mainline (though the latter misses eMMC which is a showstopper).

Attaching a long log file containing normal boot and a hang after restart.

Strangely... another board (same RockPRO64 v2.1 4g) manufactured 1 month earlier doesn't have the issue. I tried swapping eMMC to make sure it's not a tainted distributive and the problem remained on the same board each time.

Any ideas?

RE: Reboot problem on latest ayufan and 4.4 - nick76 - 11-26-2019

(03-02-2019, 04:37 PM)/dev/null Wrote: Reboot problem mentioned "Fixed" in 0.7.11 ( https://forum.pine64.org/showthread.php?tid=6706&highlight=0.7.11+reboot ) seems back again.

100% repeatable "sudo reboot" leads to hang on next kernel boot on both 0.7.11 and 0.7.12 pre-release.

System hangs after

Code:
[    0.002074] Console: colour dummy device 80x25
[    0.002493] console [tty0] enabled
[    0.002815] bootconsole [uart0] disabled
lines right before

Code:
[    0.003210] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
line that appears next after cold boot.

mrfixit2001 kernel reboots fine as well as ayufan mainline (though the latter misses eMMC which is a showstopper).

Attaching a long log file containing normal boot and a hang after restart.

Strangely... another board (same RockPRO64 v2.1 4g) manufactured 1 month earlier doesn't have the issue. I tried swapping eMMC to make sure it's not a tainted distributive and the problem remained on the same board each time.

Any ideas?

After updating the latest kernel, there is the same problem to me...

kernel-5.3.0 : The system is holding for 20 ~ 30 seconds and booting is fine
kernel-4.4.193-rockchip-dev : The system is holding for 20 ~ 30 seconds. reboot... 
kernel-4.4.167-1213-rockchip-ayufan-g34ae07687fce : delay 1 second, booting is fine 

[ 0.003716] printk: console [tty0] enabled
[ 0.004114] printk: bootconsole [uart8250] disabled
-->> no response..
The system is holding for 20 ~ 30 seconds.
or reboot
Why does it happen?

1: kernel-5.3.0-rc4-dev
2: kernel-5.3.0-rc4-dev-memtest
3: kernel-4.4.193-rockchip-dev
4: kernel-4.4.193-rockchip-dev-memtest
5: kernel-4.4.167-1213-rockchip-ayufan-g34ae07687fce
6: kernel-4.4.167-1213-rockchip-ayufan-g34ae07687fce-memtest

Would you help me?

/etc/lsb-releaseBig GrinISTRIB_ID=Ubuntu

/etc/lsb-releaseBig GrinISTRIB_RELEASE=18.04

/etc/lsb-releaseBig GrinISTRIB_CODENAME=bionic

/etc/lsb-releaseBig GrinISTRIB_DESCRIPTION="Ubuntu 18.04.3 LTS"

/etc/os-release:NAME="Ubuntu"

/etc/os-release:VERSION="18.04.3 LTS (Bionic Beaver)"

/etc/os-release:ID=ubuntu

/etc/os-release:ID_LIKE=debian

/etc/os-releaseTongueRETTY_NAME="Ubuntu 18.04.3 LTS"

/etc/os-release:VERSION_ID="18.04"

/etc/os-release:HOME_URL="https://www.ubuntu.com/"

/etc/os-release:SUPPORT_URL="https://help.ubuntu.com/"

/etc/os-release:BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"

/etc/os-releaseTongueRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"

/etc/os-release:VERSION_CODENAME=bionic
/etc/os-release:UBUNTU_CODENAME=bionic

Regards,
Nick. 

RE: Reboot problem on latest ayufan and 4.4 - dukla2000 - 11-27-2019

Hi Nick, welcome to the forums. You have managed to dig up an old thread but no matter :-)

I have no problems rebooting with
Code:
$ uname -a
Linux rpro64.dukla.net 4.4.197-1236-rockchip-ayufan-g30faab37e339 #1 SMP Tue Oct 22 11:35:10 UTC 2019 aarch64 aarch64 aarch64 GNU/Linux
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 19.10
Release: 19.10
Codename: eoan

I couldn't get 5.3.0-rc4 to boot at all.