PINE64
u-boot serial port speed? - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: General Discussion on ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=99)
+--- Thread: u-boot serial port speed? (/showthread.php?tid=6632)



u-boot serial port speed? - zener - 10-06-2018

I recently got a RockPro64 and I'm assuming it's using u-boot. I have a USB serial port adapter attached to my board and I can log in at 115200.

However, when I power cycle the board I see that it's outputting something with different serial port parameters. What are the serial port settings to be able to interact with u-boot? And what is the command sequence to get into the u-boot command line?


Thanks!


RE: u-boot serial port speed? - Bullet64 - 10-06-2018

(10-06-2018, 08:26 AM)zener Wrote: I recently got a RockPro64 and I'm assuming it's using u-boot. I have a USB serial port adapter attached to my board and I can log in at 115200.

However, when I power cycle the board I see that it's outputting something with different serial port parameters. What are the serial port settings to be able to interact with u-boot? And what is the command sequence to get into the u-boot command line?


Thanks!
  • Baudrate: 1500000
  • Data bits: 8
  • Parity: N
  • Stop bits: 1



RE: u-boot serial port speed? - zener - 10-06-2018

Wow, I tried 115200 and down to 9600. 1500000 works great. Thanks!