PINE64
Nextion Display withI Rock64 - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: RockPro64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=102)
+--- Thread: Nextion Display withI Rock64 (/showthread.php?tid=6544)



Nextion Display withI Rock64 - Mpoint - 09-15-2018

        I notice in the following link that https://www.itead.cc/blog/how-to-use-nextion-to-work-with-raspberry-pi Raberry Pi has GND, 5V TX and RX so does
Rock64 According to the Schematic http://opensource.rock-chips.com/images/d/d7/Rockchip_RK3328_Datasheet_V1.1-20170309.pdf Rock64 also has
UART1, UART2 TX and RX along with 5V and GND. Which Pin Should I be using ?  Its going to be Pin 8 for TX & Pin 10 for RX or is it going to be Pine Or is it going to be Pin 19 for TX and Pine 21 for RX ?? 
I have attached the image


RE: Nextion Display withI Rock64 - Mpoint - 10-06-2018

I would like to answer my own post, 
Rock64-Nextion-Photon
Please see the diagram attached


RE: Nextion Display withI Rock64 - tllim - 10-12-2018

(10-06-2018, 03:15 PM)Mpoint Wrote: I would like to answer my own post, 
Rock64-Nextion-Photon
Please see the diagram attached

Using UART communication for display can be slow and this limits the display resolution and refresh rate.