how to flash recovery - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85) +--- Forum: Android on Rock64 (https://forum.pine64.org/forumdisplay.php?fid=87) +--- Thread: how to flash recovery (/showthread.php?tid=5276) |
how to flash recovery - daliang1215 - 10-17-2017 my rock64 with ayufan's android 7.1.2 atv . I can't find any about install zip from sdcard when in recovery mode. menu image for recovery mode : ===== Android Recovery Android/rock64_atv/rk3328_box 7.1.2/NHG47K/86 userdebug/test-keys Use volume up/down and power. ----------------------------------------- Reboot system now reboot to bootloader apply update from adb apply update from SD card wipe data/factory reset wipe cache partition mount /system view recovery logs run graphics test power off ----------------------------------------- is there no "install zip from sdcard" option? who can help me ? RE: how to flash recovery - Farley56 - 10-17-2017 Happened to me. Once the recovery menu displayed, I couldn't figure out a key combination to get out of the menu or navigate within the menu. I googled Android recovery menu and found a list of key commands including volume up/down and others but there was no response from the keyboard or mouse connected to the Rock64. Unfortunately, no one had any advice so I had to reload the eMMC and start over. RE: how to flash recovery - elik745i - 09-21-2019 Any update on the matter? How to navigate in the recovery? RE: how to flash recovery - BowerR64 - 09-09-2020 I thought the buttons on the board navigate the recovery menu? i believe only one works you quick press to cycle threw the options then long press till it turns green then it selects that option BUT, i thought you can restart threw the system in the settings? "storage&reset" When i try it i get a rainbow spinning circle just like when you first boot for the first time so i believe this is a sort of reflash from a "recovery partition" on the storage that is compressed because after the reset it again takes a bit to start back up. ide do it that way |