+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: General Discussion on ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=86)
+--- Thread: USB -> eMMC adapter coming soon (/showthread.php?tid=5243)
USB -> eMMC adapter coming soon - Luke - 10-10-2017
You can expect to see those adapters in the shop in the near future. Here are some pictures tllim linked earlier in the IRC.
https://imgur.com/UhMult0
https://imgur.com/GU7GIqz
https://imgur.com/xq7VGki
RE: USB -> eMMC adapter coming soon - kershaw - 10-10-2017
That's awesome Luke. Should make the eMMC flashing much easier.
RE: USB -> eMMC adapter coming soon - mikedhoore - 10-11-2017
Great work !
RE: USB -> eMMC adapter coming soon - erchache2000 - 10-11-2017
I was looking for one, because I have the f**d emmc sandisk 64gb that doesn't run. ;(
This will be great to see if it's a hardware problem or a software problem...
RE: USB -> eMMC adapter coming soon - Luke - 10-11-2017
(10-11-2017, 06:29 AM)erchache2000 Wrote: I was looking for one, because I have the f**d emmc sandisk 64gb that doesn't run. ;(
This will be great to see if it's a hardware problem or a software problem...
Check IRC logs - software.
RE: USB -> eMMC adapter coming soon - erchache2000 - 10-12-2017
(10-11-2017, 07:42 AM)Luke Wrote:(10-11-2017, 06:29 AM)erchache2000 Wrote: I was looking for one, because I have the f**d emmc sandisk 64gb that doesn't run. ;(
This will be great to see if it's a hardware problem or a software problem...
Check IRC logs - software.
Yep, I received a email support that says sandisk isn't compatible with pinebook yet.
A new patch will come on next two weeks
RE: USB -> eMMC adapter coming soon - S3phi40T - 02-08-2018
I've got one of those adaptors.
Looks cheap but works as designed.
Usage is simple as hell.
Just flash OS image as you would do to SDcard.
No need for SD 2 MMC images
As new Rock64 user I can definitely recommend this simple solution.
RE: USB -> eMMC adapter coming soon - xalius - 02-09-2018
I have a couple now too and they seem easy enough too use. Only things I would recommend is to handle them carefully since open electronics/connectors are ESD sensitive and the board-to-board connectors of the eMMC modules are not designed for hundreds of mating cycles like cable connectors...