+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: Wifi/BT Module (https://forum.pine64.org/forumdisplay.php?fid=33)
+---- Thread: Pine64 doesn't recognize Wifi/BT Module (/showthread.php?tid=4757)
Pine64 doesn't recognize Wifi/BT Module - clobeca - 07-13-2017
I have two Pine A64 boards, one with 1GB RAM and one with 2GB. I plugged the Wifi/BT module into the 1GB board but accidentally plugged it in off by one pin on the connectors. The board booted up, but restarted a couple of times before finally coming up. Naturally, it did not recognize the Wifi module. When I saw my mistake, I removed power and repositioned the module. It still did not recognize the module. I tried plugging the module on the 2GB board and it worked fine. I tried the module I originally had on the 2GB board on the 1GB board and it didn't recognize that one either.
So final result: the 2GB board sees both Wifi/BT modules, but the 1GB board doesn't see either one. I'm guessing I smoked the interface on the 1GB board. Everything else appears to be working on it so far. Has anyone else experienced this?
RE: Pine64 doesn't recognize Wifi/BT Module - MarkHaysHarris777 - 07-13-2017
(07-13-2017, 07:11 PM)clobeca Wrote: I have two Pine A64 boards, one with 1GB RAM and one with 2GB. I plugged the Wifi/BT module into the 1GB board but accidentally plugged it in off by one pin on the connectors. The board booted up, but restarted a couple of times before finally coming up. Naturally, it did not recognize the Wifi module. When I saw my mistake, I removed power and repositioned the module. It still did not recognize the module. I tried plugging the module on the 2GB board and it worked fine. I tried the module I originally had on the 2GB board on the 1GB board and it didn't recognize that one either.
So final result: the 2GB board sees both Wifi/BT modules, but the 1GB board doesn't see either one. I'm guessing I smoked the interface on the 1GB board. Everything else appears to be working on it so far. Has anyone else experienced this?
Yes, sadly. You might try another wifi module ? More likely than not you managed to damage the 1G board; don't worry about it, just get another one; you may notice other strange things coming from that board in the future;
RE: Pine64 doesn't recognize Wifi/BT Module - clobeca - 07-13-2017
Thanks for the quick reply. Yes, I have two Wifi modules. Both of them work on the 2GB board, and neither one on the 1GB. Another board it is!
RE: Pine64 doesn't recognize Wifi/BT Module - MarkHaysHarris777 - 07-13-2017
(07-13-2017, 08:53 PM)clobeca Wrote: Thanks for the quick reply. Yes, I have two Wifi modules. Both of them work on the 2GB board, and neither one on the 1GB. Another board it is!
well, ok, rats.
:/
We had another person recently have this issue, and later the 1G board started acting up in other areas, so expect that too; the boards are inexpensive enough that you can make this mistake and not lose much; just order another one; only get the 2G board !