PINE64
Complete blueprint of the Pine - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: Enclosures (https://forum.pine64.org/forumdisplay.php?fid=14)
+---- Thread: Complete blueprint of the Pine (/showthread.php?tid=296)

Pages: 1 2


Complete blueprint of the Pine - Tarjei85 - 02-15-2016

Has anyone been able to get their hands on the blueprint for the board? I need to know some dimmensions for my enclosure project.
Like the exact placement of the mounting holes, and other stuff like the HDMI, USB, power connector and so on.
I allso need to know the plazement on the Z-axis, preferably from the bottom of the PCB to the top of each part.
An accurate measurement of the components will allso help me get this enclosure right on the first try. (It will be to expensive to get it wrong since I have to outsource the making of the enclosure. I dont have he right tools needed)

I looked at the wiki page, but could only find a PDF with the outer dimmensions of the PCB, nothing more.

It will be possible to calculate the placement of the mounting holes and connectors, but the Z-axis is impossible to know anything about.


RE: Complete blueprint of the Pine - tllim - 02-15-2016

(02-15-2016, 04:18 AM)Tarjei85 Wrote: Has anyone been able to get their hands on the blueprint for the board? I need to know some dimmensions for my enclosure project.
Like the exact placement of the mounting holes, and other stuff like the HDMI, USB, power connector and so on.
I allso need to know the plazement on the Z-axis, preferably from the bottom of the PCB to the top of each part.
An accurate measurement of the components will allso help me get this enclosure right on the first try. (It will be to expensive to get it wrong since I have to outsource the making of the enclosure. I dont have he right tools needed)

I looked at the wiki page, but could only find a PDF with the outer dimmensions of the PCB, nothing more.

It will be possible to calculate the placement of the mounting holes and connectors, but the Z-axis is impossible to know anything about.

The Chinese New Year break almost over and we have also gear up to provide more info. The detail board dimension is one of the top job. We current also work on the board 3D modeling and hopefully able to provide soon.


RE: Complete blueprint of the Pine - Tarjei85 - 02-15-2016

(02-15-2016, 05:55 AM)tllim Wrote:
(02-15-2016, 04:18 AM)Tarjei85 Wrote: Has anyone been able to get their hands on the blueprint for the board? I need to know some dimmensions for my enclosure project.
Like the exact placement of the mounting holes, and other stuff like the HDMI, USB, power connector and so on.
I allso need to know the plazement on the Z-axis, preferably from the bottom of the PCB to the top of each part.
An accurate measurement of the components will allso help me get this enclosure right on the first try. (It will be to expensive to get it wrong since I have to outsource the making of the enclosure. I dont have he right tools needed)

I looked at the wiki page, but could only find a PDF with the outer dimmensions of the PCB, nothing more.

It will be possible to calculate the placement of the mounting holes and connectors, but the Z-axis is impossible to know anything about.

The Chinese New Year break almost over and we have also gear up to provide more info. The detail board dimension is one of the top job. We current also work on the board 3D modeling and hopefully able to provide soon.

That sounds superb. Looking forward to finishing my model and get it into production (me and some friends are going for the same design).
The eclosure is posted and updated here http://forum.pine64.org/showthread.php?tid=281


RE: Complete blueprint of the Pine - User 563 - 02-15-2016

Looking forward to a  blueprint!  Big Grin


RE: Complete blueprint of the Pine - Tarjei85 - 02-22-2016

How are things going with the blueprints of the Pine?
I'm in desperate need for the placement and dimmensions of the connectors for the pine.
Once I get these my Mario Enclosure is going into production...


RE: Complete blueprint of the Pine - tllim - 02-22-2016

(02-22-2016, 08:11 AM)Tarjei85 Wrote: How are things going with the blueprints of the Pine?
I'm in desperate need for the placement and dimmensions of the connectors for the pine.
Once I get these my Mario Enclosure is going into production...

Try to available on this week.


RE: Complete blueprint of the Pine - Tarjei85 - 02-22-2016

(02-22-2016, 09:12 AM)tllim Wrote:
(02-22-2016, 08:11 AM)Tarjei85 Wrote: How are things going with the blueprints of the Pine?
I'm in desperate need for the placement and dimmensions of the connectors for the pine.
Once I get these my Mario Enclosure is going into production...

Try to available on this week.

I really hope so.
Thank you  Big Grin


RE: Complete blueprint of the Pine - brf - 02-23-2016

I need this information also, for all the same reasons. I have an OpenSCAD model that is complete except for the accurate placement of connector cutouts. Waiting for the data.

In addition, I am willing to upload the source code and STL file, but posting them in the forum seems like the wrong place. How do I get these files available for others to use?


RE: Complete blueprint of the Pine - Tarjei85 - 02-23-2016

(02-23-2016, 01:25 PM)brf Wrote: I need this information also, for all the same reasons.  I have an OpenSCAD model that is complete except for the accurate placement of connector cutouts.  Waiting for the data.

In addition, I am willing to upload the source code and STL file, but posting them in the forum seems like the wrong place.  How do I get these files available for others to use?

I have put mine in a shared folder on my OneDrive account. It works OK, but its not optimal. If you come over a better solution please let me know.


RE: Complete blueprint of the Pine - Tarjei85 - 03-01-2016

Is there any update on the blueprints of the board? Still no update on the wiki-page..