PINE64
Power-on pine by remote - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: General Discussion on PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=3)
+--- Thread: Power-on pine by remote (/showthread.php?tid=1998)



Power-on pine by remote - kleintvra - 08-11-2016

Is there anyway to power pine by using the airmouse?
As far as i checked the airmouse power button send the signal on the IR  and not on the wifi.
I've tried to connect an IR receiver (HX1838), but didn't have any luck powering-on pine.


RE: Power-on pine by remote - MarkHaysHarris777 - 08-11-2016

No. Not at this time.

... the IR module attaches directly to the SoC. Once the SoC is down there is no way (at this time) to send an IR signal demodulated to the PMIC to power the pine ON again. <sorry>