+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone Pro (https://forum.pine64.org/forumdisplay.php?fid=177)
+--- Forum: PinePhone Pro Hardware (https://forum.pine64.org/forumdisplay.php?fid=180)
+--- Thread: I2C connections (/showthread.php?tid=19332)
I2C connections - Beehee - 07-04-2024
I apologize if this has already been answered, but I am looking for information on the I2C ports on the PinePhone Pro.
I am aware that the pogo pins on the back provide access to one of the busses. Is there a second I2C bus that can be accessed, I looked at pictures of the main board and didn’t see anything obvious.
RE: I2C connections - tllim - 07-06-2024
(07-04-2024, 11:31 PM)Beehee Wrote: I apologize if this has already been answered, but I am looking for information on the I2C ports on the PinePhone Pro.
I am aware that the pogo pins on the back provide access to one of the busses. Is there a second I2C bus that can be accessed, I looked at pictures of the main board and didn’t see anything obvious.
i2c bus can attached multiple I2c device as long as no address conflict.
RE: I2C connections - Beehee - 07-08-2024
(07-06-2024, 11:30 PM)tllim Wrote:(07-04-2024, 11:31 PM)Beehee Wrote: I apologize if this has already been answered, but I am looking for information on the I2C ports on the PinePhone Pro.
I am aware that the pogo pins on the back provide access to one of the busses. Is there a second I2C bus that can be accessed, I looked at pictures of the main board and didn’t see anything obvious.
i2c bus can attached multiple I2c device as long as no address conflict.
Agreed. Back to my original question. I see on the schematic that there is another I2c bus that is dedicated to the accelerometer and light sensor. Does anyone know where those connectors are on the main board?