+- PINE64 (https://forum.pine64.org)
+-- Forum: PineTab (https://forum.pine64.org/forumdisplay.php?fid=140)
+--- Forum: PineTab Hardware (https://forum.pine64.org/forumdisplay.php?fid=143)
+--- Thread: Pinetab2 stays dark / won't boot (/showthread.php?tid=18486)
Pinetab2 stays dark / won't boot - derco0n - 07-13-2023
Hi everyone,
my Pinetab2 suddenly stopped working after around 4 weeks of minor usage.
The main symptom is, that the display stays complete black when trying to power on.
As Pine64's support is unfortunately not very helpful and pointed me to the community, i'd really appreciate your help.
I was able to get the following out from UART-console:
Code:
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-2 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
## Checking hash(es) for Image atf-4 ... sha256+ OK
## Checking hash(es) for Image atf-5 ... sha256+ OK
## Checking hash(es) for Image atf-6 ... sha256+ OK
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-594-g7f859117f:cl
NOTICE: BL31: Built : 04:51:16, May 11 2023
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: pmu v1 is valid 220114
INFO: dfs DDR fsp_param[0].freq_mhz= 1056MHz
INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0xa00000
INFO: SPSR = 0x3c9
U-Boot 2023.07-1-00043-g2e0e11b8e6 (Jul 01 2023 - 07:59:26 +0000)
Model: Pine64 PineTab2 v2.0
DRAM: 8 GiB (effective 7.7 GiB)
PMIC: RK8170 (on=0x80, off=0x04)
Core: 321 devices, 25 uclasses, devicetree: separate
MMC: mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
Loading Environment from nowhere... OK
In: serial@fe660000
Out: serial@fe660000
Err: serial@fe660000
Model: Pine64 PineTab2 v2.0
Net: No ethernet found.
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
** Booting bootflow 'mmc@fe310000.bootdev.part_1' with script
Booting from eMMC
Loading kernel...
Failed to load '/Image.gz'
Uncompressing kernel...
Error: Bad gzipped data
Loading initramfs...
7685356 bytes read in 68 ms (107.8 MiB/s)
Loading dtb...
120036 bytes read in 41 ms (2.8 MiB/s)
Booting...
Bad Linux ARM64 Image magic!
Boot failed (err=-14)
No ethernet found.
No ethernet found.