Partial boot after installing Manjaro on emmc

Partial boot after installing Manjaro on emmc - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111)
+--- Forum: General Discussion on Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=112)
+--- Thread: Partial boot after installing Manjaro on emmc (/showthread.php?tid=17865)

Pages: 1 2

RE: Partial boot after installing Manjaro on emmc - regivanx - 02-05-2023

Hi, the problem is solved.

I installed Tow Boot on the emmc which solved the problem.

However, when Tow Boot is installed on the SPI, I have exactly the same problem as with U-Boot: the system does not detect the encrypted partition on the SD card, it does not detect the SD card at all (no /dev/mmcblk1), booting is impossible and I get into an emergency shell.

Procedure:

On another computer, download the latest version of Tow Boot at https://github.com/Tow-Boot/Tow-Boot/releases. Choose the pinebookPro version.

Assume the latest version is pine64-pinebookPro-2021.10-005.tar.xz

Code:
$ wget https://github.com/Tow-Boot/Tow-Boot/releases/download/release-2021.10-005/pine64-pinebookPro-2021.10-005.tar.xz # download archive

$ tar xvf pine64-pinebookPro-2021.10-005.tar.xz # unzip

$ cd pine64-pinebookPro-2021.10-005

$ cp shared.disk-image.img [your-usb-stick-location]

$ sudo -s

# dd if=spi.installer.img of=[your-SDcard-location-in-/dev/] bs=1M status=progress

Then, I plugged the USB key into the faulty computer, and I started it with the encrypted SDcard to arrive at the emergency shell.

Perhaps due to the abnormal boot, I was unable to use dd with the options given in the documentation.

On the emergency shell,

Code:
# dd if=shared.disk-image.img of=/dev/mmcblk2 bs=1M oflag=direct,sync status=progress # /dev/mmcblk2 is internal emmc memory.

returns an error.

So I used the command:

Code:
# dd if=shared.disk-image.img of=/dev/mmcblk2 bs=1M oflag=direct conv=fsync

Source.

What worked.

Then I replaced the encrypted SDcard with the Tow Boot SDcard containing spi.installer.img, rebooted and overwritten the SPI memory.

Finally, I replaced the Tow Boot SDcard with the encrypted SDcard, and when I restarted, everything was working normally.

I tried to install Tow Boot on SPI memory, but as I said, Tow Boot on SPI does not detect the encrypted SDcard.

I haven't tested unencrypted system boot on emmc with Tow Boot on SPI. As Tow Boot works on the emmc, I leave it as is.

Thanks for your help, wdt and KC9UDX!

RE: Partial boot after installing Manjaro on emmc - wdt - 02-06-2023

FYI (and anyone else) the problem with the command,,,
dd does not work with csv (comma separated values) only <parmeter>=<value>
gotta wonder how (emmc) mbr persisted