Wifi no scan results - Bluetooth adapter not available - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120) +--- Forum: PinePhone Hardware (https://forum.pine64.org/forumdisplay.php?fid=122) +--- Thread: Wifi no scan results - Bluetooth adapter not available (/showthread.php?tid=17118) |
Wifi no scan results - Bluetooth adapter not available - emsyr - 08-08-2022 Hi. This is my first post in the forum. I've been using my Pinephone (convergence package) as a daily driver for more than six months (PostmarketOS SXMO). Until two days ago Wifi/Bt were working correctly. Then a strange thing happened and after that I have Wifi/Bt module problem. I was extracting an image to SD card when the phone froze and I did a hard reset. After that it couldn't mount the root partition, I reinstalled PostmarketOS SXMO (sxmo-de-sway 20220803-0523) and now I'm experiencing the following problems: 1. Wifi is working but scanning for wireless networks returns no results (like there is no wireless network in the area) 2. No Bluetooth adapter is appeared available I also tried PostmarketOS plasma-mobile distro and I had the same two problems. Some of the diagnostics I tried: 1. for Wifi Code: pine64-pinephone:~$ nmcli r ifconfig command output shows wlan0. 2. for bluetooth Code: pine64-pinephone:~$ bluetoothctl I've tried the solution described here https://gitlab.com/ubports/porting/community-ports/pinephone/-/issues/16#note_296549402 : Code: sudo nmcli radio all off No luck. Needed services are running: Code: pine64-pinephone:~$ rc-status It seems to me that it is a Wifi/Bt hardware module failure but I'm giving it a shot here in case anyone of you mates can help me out. Thanks in advance! RE: Wifi no scan results - Bluetooth adapter not available - emsyr - 08-29-2022 I've been digging into the forum for similar cases e.g. and most of them lead to a hardware failure conclusion. I booted factorytest v.0.64.0 image, I did the "Automatic test" and it showed that RTL8723CS module failed. So, I've concluded that my PP suffered a WiFi/BT module hardware failure. I've decided to move on to PPP hoping that I'll be lucky this time. Greetings to you all ! |