SD Card insertion depth - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PinePhone Pro (https://forum.pine64.org/forumdisplay.php?fid=177) +--- Forum: PinePhone Pro Hardware (https://forum.pine64.org/forumdisplay.php?fid=180) +--- Thread: SD Card insertion depth (/showthread.php?tid=15933) |
SD Card insertion depth - nristen - 02-01-2022 I want to verify how far an sd card should be inserted into the pine phone pro... Please comment if the SD card depicted is inserted too deeply. RE: SD Card insertion depth - dukla2000 - 02-01-2022 (02-01-2022, 12:02 PM)nristen Wrote: I want to verify how far an sd card should be inserted into the pine phone pro... That looks dead right to me. 1) Exactly the same as an Evo+ in mine 2) I can also just see the ends of half the SIM springs on the left of the SDcard in the pic (if that makes sense) RE: SD Card insertion depth - tckosvic - 02-01-2022 (02-01-2022, 03:23 PM)dukla2000 Wrote:(02-01-2022, 12:02 PM)nristen Wrote: I want to verify how far an sd card should be inserted into the pine phone pro... Looks ok to me. I do have a problem getting sd card into slot. Doesn't fit cleanly like on pinephone. Requires some jiggling around and some significant force. I wonder if something is out of alignment and perhaps could be adjusted a little. Anyone else have same problem? tom kosvic RE: SD Card insertion depth - bcnaz - 02-02-2022 I always just push it in until it bottoms in the socket... (and straight) I opened one of my phones and compared it to your photo, yep, that is how it looks. I have never had a problem with the socket, ----> I have swapped sd cards hundreds of times since the old Brave Heart days. RE: SD Card insertion depth - nristen - 02-03-2022 (02-02-2022, 08:02 AM)bcnaz Wrote: I always just push it in until it bottoms in the socket... (and straight) Thank you everyone for the responses. I was concerned that I was either pushing the card in too far or had damaged the slot somehow. As it turns out, I took the suggestion in another thread to try using Etcher to write the image to the sd card which indicated a verification problem after the write was done. I switched to another SD card which worked beautifully... I was able to boot successfully into Mobian after holding the power button down for 5 seconds. |