+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: PostmarketOS on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=124)
+---- Thread: pinephone boots to green screen after running out of space (/showthread.php?tid=15893)
pinephone boots to green screen after running out of space - costava - 01-29-2022
I installed PostmarketOS sxmo on my pinephone eMMC via jumpdrive.
(The installer image from https://images.postmarketos.org/bpo/v21.12/pine64-pinephone/sxmo-de-sway/20220119-0539/ )
Code:
$ df -h /
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/root 1.7G 1.6G 0 100% /which seemed wrong to me. I would expect a Size much closer to 32G.
I installed a small number of packages then tried to clone a git repo. The cloning failed due to not enough space.
I rebooted and get a blank green screen now after the pmOS logo after entering encryption password.
Based on the df output, did I screw up the install badly somehow?
I have no data to lose on the device and would be fine reinstalling, but do I have any sane way forward from the current state? sshd is not set to run on startup and the device does not have a static IP.
To be more clear, my steps:
- dd jumpdrive img to SD card
- boot pinephone with SD card
- connected to PC and dd'd the sxmo installer img to eMMC
- booted pinephone without SD card and installed
- pmOS was running well across multiple boots
RE: pinephone boots to green screen after running out of space - costava - 01-30-2022
I reinstalled and df is now giving expected output.
I deleted the partitions on the eMMC (device became one block of unallocated) before dd'ing onto it via jumpdrive.