+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: General Discussion on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=127)
+--- Thread: KDE plasma Pinephone not loading (/showthread.php?tid=13607)
KDE plasma Pinephone not loading - Serolis - 04-10-2021
Hello everyone;
I finally managed to get my hands on a KDE plasma pinephone, I switched it on for first time three days ago, I updated it and everything was going well. Then yesterday I tried to use the docking bar for first time and the phone crashed, now when I start the phone it will stay on the logging command page and the only error I can see is this one:
at command 'at+QCFG="fast/poweroff"' returned error
The phone won't let me do anything at that point. Anyone has got any suggestions as to what I can do now? Do I need to install a new image?
Thank you for your help!
RE: KDE plasma Pinephone not loading - MtnSk8 - 04-17-2021
(04-10-2021, 08:48 AM)Serolis Wrote: Hello everyone;IMO, Plasma Mobile is probably a year or so away from being usable. I flash and test KDE on the sd card once and a while just to see how it's going.
I finally managed to get my hands on a KDE plasma pinephone, I switched it on for first time three days ago, I updated it and everything was going well. Then yesterday I tried to use the docking bar for first time and the phone crashed, now when I start the phone it will stay on the logging command page and the only error I can see is this one:
at command 'at+QCFG="fast/poweroff"' returned error
The phone won't let me do anything at that point. Anyone has got any suggestions as to what I can do now? Do I need to install a new image?
Thank you for your help!
. (The error you posted is related to the modem. I'm not sure how it relates to the conv. dock.)
I run Mobian on the emmc and everything (except mms) works out of the box. Plasma Mobile has been a thing for 10 years now so I'm not holding my breath for its maturation.
USB-C Convergence Dock works like a charm in Mobian.
Side note:
There is a design flaw in the usb-c port on the pinephone. Only cables with enough of the male end exposed to fully insert (and not hilt out on the phone body) will work reliably.
The supplied usb-c dock has a male end that is not long enough for the pinephone's flawed port. Also it's metal and you can't just melt away some plastic to expose more of the usb-c end.
However, if you remove the phone's back cover the dock can then be plugged all the way in.
Cheers!