Manjaro Dim Display (Brightness 40%) After Every System Reboot - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111) +--- Forum: Linux on Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=114) +--- Thread: Manjaro Dim Display (Brightness 40%) After Every System Reboot (/showthread.php?tid=13047)

Manjaro Dim Display (Brightness 40%) After Every System Reboot - runlinux.run - 02-08-2021 Hello All, I have a Pinebook Pro running factory Manjaro. Every single time I reboot the system, the brightness is reset to 40%. I have to use the Fn+F2 key to manually adjust the brightness to 70%. Does anyone have a solution so that the display brightness will be set at 70% every single time the system is started? I searched online for hours. I didn't find a solution that works. Thanks RE: Manjaro Dim Display (Brightness 40%) After Every System Reboot - xyzzy - 02-13-2021 Mine was always getting reset to about 1% on every boot. The culprit was systemd-backlight@.service. This saves the brightness on shutdown and restore it on startup. But it was always saving the 0% brightness the screen is set to after closing the lid before shutdown! So I just disabled it. RE: Manjaro Dim Display (Brightness 40%) After Every System Reboot - MtnSk8 - 02-15-2021 These tabs (On AC Power/On Batter) set the brightness at startup. Cheers! edit: Also if you uncheck the top box on both tabs the last brightness value will be set at startup.