+- PINE64 (https://forum.pine64.org)
+-- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://forum.pine64.org/forumdisplay.php?fid=21)
+--- Thread: Script Not Found error using PhoenixCard (/showthread.php?tid=1146)
Script Not Found error using PhoenixCard - Ghost - 05-25-2016
A number of people have reported getting a 'script not found' error when trying to use PhoenixCard. This is because you are trying to burn an image that is not compatible with the PhoenixCard application (i.e. a 'dd' image).
On the Software/Image Download section of the Pine64 wiki, there are many images available, but only the images specifically labelled so are burnable with PhoenixCard.
The images labelled as being a 'DD image' are of a fixed size (typically 8GB, 16GB, 32GB, 64GB) and are intended for burning via the dd command in a terminal, with Win32DiskImager, or with Rufus or similar software (such as ApplePi Baker or Etcher on a Mac).
See also this similar thread.
RE: Script Not Found error using PhoenixCard - pfeerick - 07-01-2016
Another tool that might be useful (on Windows) is USB Image Tool. It can read or write DD style raw IMG files, and can also be tricked into opening zipped IMGs directly - no need to unzip! I find it handy for making backups of working images as zipped images (it describes them as IMZ, but they are simply zipped IMGs), so they don't take up 4GB when only 500-600MB is in use.
RE: Script Not Found error using PhoenixCard - tllim - 07-02-2016
(07-01-2016, 10:14 PM)pfeerick Wrote: Another tool that might be useful (on Windows) is USB Image Tool. It can read or write DD style raw IMG files, and can also be tricked into opening zipped IMGs directly - no need to unzip! I find it handy for making backups of working images as zipped images (it describes them as IMZ, but they are simply zipped IMGs), so they don't take up 4GB when only 500-600MB is in use.
Thanks on the good tips, I will try out on this weekend.
RE: Script Not Found error using PhoenixCard - jimwrey - 07-16-2016
(05-25-2016, 12:24 AM)Ghost Wrote: A number of people have reported getting a 'script not found' error when trying to use PhoenixCard. This is because you are trying to burn an image that is not compatible with the PhoenixCard application (i.e. a 'dd' image).
On the Software/Image Download section of the Pine64 wiki, there are many images available, but only the images specifically labelled so are burnable with PhoenixCard.
The images labelled as being a 'DD image' are of a fixed size (typically 8GB, 16GB, 32GB, 64GB) and are intended for burning via the dd command in a terminal, with Win32DiskImager, or with Rufus or similar software (such as ApplePi Baker or Etcher on a Mac).
See also this similar thread.
Certainly educational for me, being a NOOB ... spent the better part of last night and half of today going between Pheonix cardwriter and Win32 Disk Imager ... getting exactly those errors ... Thanks for the help.
To a beginner that difference is not obvious. Thanks for the help.
RE: Script Not Found error using PhoenixCard - Ghost - 07-16-2016
Glad this thread has been of some benefit
