(01-03-2016, 01:58 AM)umiddelb Wrote: Hi,

I've prepared two tar archives containing a minimal 64bit ARM root filesystem for Debian Jessie (login: debian, passwd: 111111) and Ubuntu Trusty (login ubuntu, passwd: 111111). You can find the scripts for creating the root filesystems and some additional information about the tar archives here. Once the kernel image / modules and the boot loader are available for the PINE64, I'll try to build a complete image.

Cheers
Uli

(02-17-2016, 03:17 PM)umiddelb Wrote:

(01-03-2016, 01:58 AM)umiddelb Wrote: Hi,

I've prepared two tar archives containing a minimal 64bit ARM root filesystem for Debian Jessie (login: debian, passwd: 111111) and Ubuntu Trusty (login ubuntu, passwd: 111111). You can find the scripts for creating the root filesystems and some additional information about the tar archives here. Once the kernel image / modules and the boot loader are available for the PINE64, I'll try to build a complete image.

Cheers
Uli

I've updated the information about creating your own bootable Linux uSD card, since kernel & boot loader are available. Debian is first, Arch and Ubuntu are going to follow.

++
* The PINE64 boots up nicely
* The 3.10 kernel doesn't seem to fry the SoC
* You may run Docker
* You may use the USB ports
* You may start to port your own project to the PINE64 

--
* The kernel is as old as the hills, and not in good shape (you should expect compile errors and broken dependency configuration if you start to tweak it)
* The kernel panics during reboot/shutdown FIXED
* The internal ethernet device has a speed issue, you shouldn't expect to get more the several kbit/s over the wire. (best is to connect an USB to ethernet device)
* WiFi isn't working at this time FIXED: modprobe 8723bs
* You cannot login via serial console, although /dev/ttyS0 is working FIXED: Was missing CONFIG_FHANDLE
* Haven't tested video
* May more to be found

(02-18-2016, 05:38 PM)longsleep Wrote: @umiddelb: I fixed the BUG on reboot and while experimenting with HDMI, i noticed other DTB changes and with those Ethernet seems to work at much better. You get it all when you update to the heads of linux-pine64 and build-pine64-image and write a new U-Boot and the DTB on the boot partition.

(02-19-2016, 02:32 PM)umiddelb Wrote:

(02-18-2016, 05:38 PM)longsleep Wrote: @umiddelb: I fixed the BUG on reboot and while experimenting with HDMI, i noticed other DTB changes and with those Ethernet seems to work at much better. You get it all when you update to the heads of linux-pine64 and build-pine64-image and write a new U-Boot and the DTB on the boot partition.

@longsleep: Do you think you will be able to update  simpleimage-pine64-20160207-1.img.xz? I've only updated the kernel and dtb and I still have the speed issue with eth0.

(02-18-2016, 05:38 PM)longsleep Wrote: @umiddelb: I fixed the BUG on reboot and while experimenting with HDMI, i noticed other DTB changes and with those Ethernet seems to work at much better. You get it all when you update to the heads of linux-pine64 and build-pine64-image and write a new U-Boot and the DTB on the boot partition.

(02-19-2016, 02:32 PM)umiddelb Wrote:

(02-18-2016, 05:38 PM)longsleep Wrote: @umiddelb: I fixed the BUG on reboot and while experimenting with HDMI, i noticed other DTB changes and with those Ethernet seems to work at much better. You get it all when you update to the heads of linux-pine64 and build-pine64-image and write a new U-Boot and the DTB on the boot partition.

@longsleep: Do you think you will be able to update  simpleimage-pine64-20160207-1.img.xz? I've only updated the kernel and dtb and I still have the speed issue with eth0.

(02-20-2016, 03:18 PM)umiddelb Wrote: @longsleep: Do you think you will be able to update  simpleimage-pine64-20160207-1.img.xz? I've only updated the kernel and dtb and I still have the speed issue with eth0.