(06-06-2019, 11:49 AM)Tim Jones Wrote: Now, it's time to take over the world!

(06-06-2019, 11:49 AM)Tim Jones Wrote: Any further news on this?  I still can't boot from 190531 via 64GB eMMC.  I've tried flashing with Etcher and by using dd and the un-xz'd image with the same result.

Is there anything that I can provide to assist?  As mentioned before the armbian variants install and boot properly.  I've ordered the serial terminal adapter, but it's "in the mail".

When I reloaded armbian on this chip, I now can't boot from armbian.  I grabbed an eMMC from another SBC, flashed 190531, and I'm now booting!

Now, it's time to take over the world!

Tim

---

(06-06-2019, 11:49 AM)Tim Jones Wrote: Now, it's time to take over the world!

Oops, I should have said "Now it's time to ask lots of questions ...

I have tried to enable a 2560x1080 mode for my UWHD monitor.  The results are a black screen that requires a reboot.  Has anyone gotten this to work?  Here's my modeline from one of the armbian runs:

# 2560x1080 @ 60.00 Hz hsync: 67.08 kHz; pclk: 230.76 MHz
  Modeline "2560x1080_60.00"  230.76  2560 2728 3000 3440  1080 1081 1084 1118  -HSync +Vsync

Any ideas, or is this a "wait for it" moment?

Tim

(06-01-2019, 12:42 PM)pbut5 Wrote: Just tried on this image like I posted in the non desktop version of your image.

No boot with a custom compiled kernel  it seems to crash as soon as pcie is starting.

I've tried on both your desktop and non desktop debian images and on the armbian image with the same result.

Edit:
@Mrfixit2001 

I have no idea if it's readable / useful but I'm adding a serial log of the error I get with a pcie attached it seems to error as soon as the custom compiled kernel is loaded.

(06-07-2019, 02:55 PM)pbut5 Wrote: @Mrfixit2001
And I can boot without a card in the pcie with the custom compiled kernel but with a card in the pcie it doesn't boot.

(06-07-2019, 07:34 AM)Mrfixit2001 Wrote: I would probably start by removing the resolution that's defined in /boot/extlinux/extlinux.conf and see if that helps!

(06-12-2019, 03:31 PM)pbut5 Wrote: @Tim Jones
I'm not sure what the power draw on my card is.

But I have 3 different cards that I have been trying all of which worked on mrfixit's first kernel release (Though there were issues with pcie lockups which others also had). But since all of the pcie fixes it's not just that they no longer work it's that the kernel will no longer boot with a card in the pcie. It crashes as soon as the pcie driver s loaded by the look of the serial.