PINE64
[SOLVED] No sound from phone-jack via "es8316" on rockpro64 - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: Linux on RockPro64 (https://forum.pine64.org/forumdisplay.php?fid=101)
+--- Thread: [SOLVED] No sound from phone-jack via "es8316" on rockpro64 (/showthread.php?tid=6409)

Pages: 1 2


[SOLVED] No sound from phone-jack via "es8316" on rockpro64 - t4_4t - 08-15-2018

The environment is "bionic-lxde-rockpro64-0.7.9-1067-arm64.img.xz".(https://github.com/ayufan-rock64/linux-build/releases/download/0.7.9/bionic-lxde-rockpro64-0.7.9-1067-arm64.img.xz)
kernel is updated to "linux-image-4.4.138-1094". (https://github.com/ayufan-rock64/linux-kernel/releases/download/4.4.138-1094-rockchip-ayufan/linux-image-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee_4.4.138-1094-rockchip-ayufan_arm64.deb)


The sound via hdmi is output well.
However, there is no sound via "es8316", but somehow rubbish comes out on the serial console.

Is there a person who has successfully outputted sound via "es8316" ?


RE: No sound from phone-jack via "es8316" on rockpro64 - Juwie - 08-18-2018

Moin!

> Is there a person who has successfully outputted sound via "es8316" ?

Just wanted to say that you are not allone: Same problem here.

Greetings, J.


RE: [SOLVED] No sound from phone-jack via "es8316" on rockpro64 - t4_4t - 10-05-2018

As a result of various investigations,
These problems turned out to be caused by the kernel side.

The issues is as follows (0.7.9: gitlab-ci-linux-build-67: 4.4.132-1075)
1. "es8316-sound" no sound.
2. "spdif-sound"  no sound.
3. "serial-console output" contains garbage.

All of the above issues have been solved by modifying kernel.

---
*Additional information)
 At currently the newest kernel (4.4.154-1122),
 all sound (in addition to the above, "hdmi-sound" also) can not output.

I also confirmed that it works correctly with the same modification.


RE: [SOLVED] No sound from phone-jack via "es8316" on rockpro64 - dukla2000 - 10-06-2018

(10-05-2018, 12:23 AM)t4_4t Wrote: As a result of various investigations,
These problems turned out to be caused by the kernel side.

The issues is as follows (0.7.9: gitlab-ci-linux-build-67: 4.4.132-1075)
1. "es8316-sound" no sound.
2. "spdif-sound"  no sound.
3. "serial-console output" contains garbage.

All of the above issues have been solved by modifying kernel.

---
*Additional information)
 At currently the newest kernel (4.4.154-1122),
 all sound (in addition to the above, "hdmi-sound" also) can not output.

I also confirmed that it works correctly with the same modification.


I agree with your findings on 4.4.132 & 4.4.154 kernels - what mods do youu apply to the kernel to correct things?


RE: [SOLVED] No sound from phone-jack via "es8316" on rockpro64 - lukanite - 10-10-2018

Just upgraded to 4.4.154-1122 and have the same issue here as well.


RE: [SOLVED] No sound from phone-jack via "es8316" on rockpro64 - dukla2000 - 10-24-2018

OK - still trying to get some noise out of my ES8316. Think I am pretty close but help/suggestions required, please!

I am compiling my own 4.19 kernel: Ayufan versions have no ALSA devices at all. I now have
Code:
chris@rpro64:~$ uname -a Linux rpro64.dukla.net 4.19.0 #3 SMP PREEMPT Wed Oct 24 10:47:48 BST 2018 aarch64 aarch64 aarch64 GNU/Linux chris@rpro64:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: rockchipes8316c [rockchip,es8316-codec], device 0: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 []   Subdevices: 1/1   Subdevice #0: subdevice #0

Which is quite promising. Also
Code:
$ aplay -L null     Discard all samples (playback) or generate zero samples (capture) default:CARD=rockchipes8316c     rockchip,es8316-codec,     Default Audio Device sysdefault:CARD=rockchipes8316c     rockchip,es8316-codec,     Default Audio Device dmix:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Direct sample mixing device dsnoop:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Direct sample snooping device hw:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Direct hardware device without any conversions plughw:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Hardware device with all software conversions

But

Code:
$ speaker-test -c 2 sysdefault:CARD=rockchipes8316c speaker-test 1.1.6 Playback device is default Stream parameters are 48000Hz, S16_LE, 2 channels Using 16 octaves of pink noise Playback open error: -22,Invalid argument

And then system log fills with
Code:
[   83.424483] es8316 1-0010: No sysclk provided [   83.425020] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22

I did remember 0010 in an error message earlier in the boot:

Code:
$ dmesg | grep ff880000 [    2.090028] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by 1-0010; cannot claim for ff880000.i2s [    2.090907] rockchip-pinctrl pinctrl: pin-128 (ff880000.i2s) status -22 [    2.092501] rockchip-i2s ff880000.i2s: Error applying setting, reverse things back [    2.093180] rockchip-i2s: probe of ff880000.i2s failed with error -22

So the question - how to sort the 1-0010 | gpio4-0 | ff880000.i2s conflict? Pretty sure this is in the device tree somewhere but have yet to find something obvious.


RE: [SOLVED] No sound from phone-jack via "es8316" on rockpro64 - t4_4t - 10-26-2018

The problem of "es8316" is quite tough and can not be solved by only modifying "*.dts" or "kernel-config".

For example, your proposal is,
> So the question - how to sort the 1-0010 | gpio4-0 | ff880000.i2s conflict ?

If you fix it, you can surely see some improvement.
However, this kind of modification alone is not enough,
and only the effect of reducing errors from the "boot-log" is obtained.

In order for "es8316" to work correctly, both "dts" and "*.c source-code" modifications are necessary,
and the modification is more extensive (perhaps, more than you think).

"original-kernel (4.19.0-1073-ayufan)"
https://github.com/ayufan-rock64/linux-mainline-kernel/releases/download/4.19.0-1073-ayufan/linux-image-4.19.0-1073-ayufan-ga6e013135a6e_4.19.0-1073-ayufan_arm64.deb
Code:
$ uname -a Linux Rock64 4.19.0-1073-ayufan-ga6e013135a6e #1 SMP PREEMPT Tue Oct 23 09:19:54 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux [   16.057479] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010 [   16.059298] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22 [   16.060034] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk  on device rockchip-pinctrl [   16.061258] es8316 1-0010: Error applying setting, reverse things back [   16.062080] es8316: probe of 1-0010 failed with error -22 $ aplay -l aplay: device_list:270: no soundcards found... $ aplay -L default    Playback/recording through the PulseAudio sound server null    Discard all samples (playback) or generate zero samples (capture) pulse    PulseAudio Sound Server $ pactl list sinks Sink #0        State: IDLE        Name: auto_null        Description: Dummy Output        Driver: module-null-sink.c        Sample Specification: s16le 2ch 44100Hz        Channel Map: front-left,front-right        Owner Module: 10        Mute: no        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                balance 0.00        Base Volume: 65536 / 100% / 0.00 dB        Monitor Source: auto_null.monitor        Latency: 2213366 usec, configured 2000000 usec        Flags: DECIBEL_VOLUME LATENCY        Properties:                device.description = "Dummy Output"                device.class = "abstract"                device.icon_name = "audio-card"        Formats:                pcm

"original-kernel" with "modified-dts" (your proposal, perhaps what you tried to do)
Code:
$ uname -a Linux Rock64 4.19.0-1073-ayufan-ga6e013135a6e #1 SMP PREEMPT Tue Oct 23 09:19:54 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux [   10.538432] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1 [   10.539291] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack [   10.540228] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P [   10.540973] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P [   11.978401] es8316 1-0010: ASoC: Differential Mux DAPM update failed: -6 [   11.979565] es8316 1-0010: ASoC: Digital Mic Mux DAPM update failed: -6 [   13.149657] es8316 1-0010: ASoC: Differential Mux DAPM update failed: -6 [   13.151011] es8316 1-0010: ASoC: Digital Mic Mux DAPM update failed: -6 $ aplay -l **** List of PLAYBACK Hardware Devices **** [  280.461123] es8316 1-0010: No sysclk provided [  280.464960] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 ... [  280.507795] es8316 1-0010: No sysclk provided [  280.511685] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 card 0: rockchipes8316c [rockchip,es8316-codec], device 0: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 []   Subdevices: 1/1   Subdevice #0: subdevice #0 $ aplay -L [  347.616981] es8316 1-0010: No sysclk provided [  347.620827] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 ... [  347.663448] es8316 1-0010: No sysclk provided [  347.667337] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 default     Playback/recording through the PulseAudio sound server null     Discard all samples (playback) or generate zero samples (capture) pulse     PulseAudio Sound Server sysdefault:CARD=rockchipes8316c     rockchip,es8316-codec,     Default Audio Device dmix:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Direct sample mixing device dsnoop:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Direct sample snooping device hw:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Direct hardware device without any conversions plughw:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Hardware device with all software conversions $ pactl list sinks [  129.097332] es8316 1-0010: No sysclk provided [  129.097841] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 ... [  129.110316] es8316 1-0010: No sysclk provided [  129.110825] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 Sink #0         State: IDLE         Name: auto_null         Description: Dummy Output         Driver: module-null-sink.c         Sample Specification: s16le 2ch 44100Hz         Channel Map: front-left,front-right         Owner Module: 11         Mute: no         Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                 balance 0.00         Base Volume: 65536 / 100% / 0.00 dB         Monitor Source: auto_null.monitor         Latency: 2216568 usec, configured 2000000 usec         Flags: DECIBEL_VOLUME LATENCY         Properties:                 device.description = "Dummy Output"                 device.class = "abstract"                 device.icon_name = "audio-card"         Formats:                 pcm


"my-kernel"
Code:
$ uname -a Linux Rock64 4.19.0-1073-ayufan-ga6e013135a6e #1 SMP PREEMPT Tue Oct 23 20:05:55 JST 2018 aarch64 aarch64 aarch64 GNU/Linux [    3.683845] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok [    3.684589] asoc-simple-card es8316-sound: ASoC: no DMI vendor name! [    3.691358] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok [    3.692034] asoc-simple-card spdif-sound: ASoC: no DMI vendor name! [    4.254556] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok [    4.255369] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name! [    4.500561] ALSA device list: [    4.500561]   #0: ROCKCHIP,ES8316 [    4.500561]   #1: ROCKCHIP,SPDIF [    4.500561]   #2: ROCKCHIP,HDMI $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ROCKCHIPES8316 [ROCKCHIP,ES8316], device 0: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 []   Subdevices: 1/1   Subdevice #0: subdevice #0 card 1: ROCKCHIPSPDIF [ROCKCHIP,SPDIF], device 0: ff870000.spdif-dit-hifi dit-hifi-0 []   Subdevices: 1/1   Subdevice #0: subdevice #0 card 2: ROCKCHIPHDMI [ROCKCHIP,HDMI], device 0: ff8a0000.i2s-i2s-hifi i2s-hifi-0 []   Subdevices: 1/1   Subdevice #0: subdevice #0 $ aplay -L default     Playback/recording through the PulseAudio sound server null     Discard all samples (playback) or generate zero samples (capture) pulse     PulseAudio Sound Server default:CARD=ROCKCHIPES8316     ROCKCHIP,ES8316,     Default Audio Device sysdefault:CARD=ROCKCHIPES8316     ROCKCHIP,ES8316,     Default Audio Device dmix:CARD=ROCKCHIPES8316,DEV=0     ROCKCHIP,ES8316,     Direct sample mixing device dsnoop:CARD=ROCKCHIPES8316,DEV=0     ROCKCHIP,ES8316,     Direct sample snooping device hw:CARD=ROCKCHIPES8316,DEV=0     ROCKCHIP,ES8316,     Direct hardware device without any conversions plughw:CARD=ROCKCHIPES8316,DEV=0     ROCKCHIP,ES8316,     Hardware device with all software conversions default:CARD=ROCKCHIPSPDIF     ROCKCHIP,SPDIF,     Default Audio Device sysdefault:CARD=ROCKCHIPSPDIF     ROCKCHIP,SPDIF,     Default Audio Device dmix:CARD=ROCKCHIPSPDIF,DEV=0     ROCKCHIP,SPDIF,     Direct sample mixing device dsnoop:CARD=ROCKCHIPSPDIF,DEV=0     ROCKCHIP,SPDIF,     Direct sample snooping device hw:CARD=ROCKCHIPSPDIF,DEV=0     ROCKCHIP,SPDIF,     Direct hardware device without any conversions plughw:CARD=ROCKCHIPSPDIF,DEV=0     ROCKCHIP,SPDIF,     Hardware device with all software conversions default:CARD=ROCKCHIPHDMI     ROCKCHIP,HDMI,     Default Audio Device sysdefault:CARD=ROCKCHIPHDMI     ROCKCHIP,HDMI,     Default Audio Device dmix:CARD=ROCKCHIPHDMI,DEV=0     ROCKCHIP,HDMI,     Direct sample mixing device dsnoop:CARD=ROCKCHIPHDMI,DEV=0     ROCKCHIP,HDMI,     Direct sample snooping device hw:CARD=ROCKCHIPHDMI,DEV=0     ROCKCHIP,HDMI,     Direct hardware device without any conversions plughw:CARD=ROCKCHIPHDMI,DEV=0     ROCKCHIP,HDMI,     Hardware device with all software conversions $ pactl list sinks Sink #0         State: IDLE         Name: alsa_output.platform-es8316-sound.stereo-fallback         Description: Built-in Audio Stereo         Driver: module-alsa-card.c         Sample Specification: s16le 2ch 44100Hz         Channel Map: front-left,front-right         Owner Module: 6         Mute: no         Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                 balance 0.00         Base Volume: 65536 / 100% / 0.00 dB         Monitor Source: alsa_output.platform-es8316-sound.stereo-fallback.monitor         Latency: 1896804 usec, configured 2000000 usec         Flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY         Properties:                 alsa.resolution_bits = "16"                 device.api = "alsa"                 device.class = "sound"                 alsa.class = "generic"                 alsa.subclass = "generic-mix"                 alsa.name = ""                 alsa.id = "ff890000.i2s-ES8316 HiFi ES8316 HiFi-0"                 alsa.subdevice = "0"                 alsa.subdevice_name = "subdevice #0"                 alsa.device = "0"                 alsa.card = "0"                 alsa.card_name = "ROCKCHIP,ES8316"                 alsa.long_card_name = "ROCKCHIP,ES8316"                 device.bus_path = "platform-es8316-sound"                 sysfs.path = "/devices/platform/es8316-sound/sound/card0"                 device.form_factor = "internal"                 device.string = "hw:0"                 device.buffering.buffer_size = "352800"                 device.buffering.fragment_size = "176400"                 device.access_mode = "mmap+timer"                 device.profile.name = "stereo-fallback"                 device.profile.description = "Stereo"                 device.description = "Built-in Audio Stereo"                 module-udev-detect.discovered = "1"                 device.icon_name = "audio-card"         Ports:                 analog-output-headphones: Headphones (priority: 9000)         Active Port: analog-output-headphones         Formats:                 pcm Sink #1         State: IDLE         Name: alsa_output.platform-hdmi-sound.stereo-fallback         Description: Built-in Audio Stereo         Driver: module-alsa-card.c         Sample Specification: s16le 2ch 44100Hz         Channel Map: front-left,front-right         Owner Module: 7         Mute: no         Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                 balance 0.00         Base Volume: 65536 / 100% / 0.00 dB         Monitor Source: alsa_output.platform-hdmi-sound.stereo-fallback.monitor         Latency: 1949733 usec, configured 2000000 usec         Flags: HARDWARE DECIBEL_VOLUME LATENCY         Properties:                 alsa.resolution_bits = "16"                 device.api = "alsa"                 device.class = "sound"                 alsa.class = "generic"                 alsa.subclass = "generic-mix"                 alsa.name = ""                 alsa.id = "ff8a0000.i2s-i2s-hifi i2s-hifi-0"                 alsa.subdevice = "0"                 alsa.subdevice_name = "subdevice #0"                 alsa.device = "0"                 alsa.card = "2"                 alsa.card_name = "ROCKCHIP,HDMI"                 alsa.long_card_name = "ROCKCHIP,HDMI"                 device.bus_path = "platform-hdmi-sound"                 sysfs.path = "/devices/platform/hdmi-sound/sound/card2"                 device.form_factor = "internal"                 device.string = "hw:2"                 device.buffering.buffer_size = "352800"                 device.buffering.fragment_size = "176400"                 device.access_mode = "mmap+timer"                 device.profile.name = "stereo-fallback"                 device.profile.description = "Stereo"                 device.description = "Built-in Audio Stereo"                 module-udev-detect.discovered = "1"                 device.icon_name = "audio-card"         Ports:                 analog-output: Analog Output (priority: 9900)         Active Port: analog-output         Formats:                 pcm Sink #2         State: IDLE         Name: alsa_output.platform-spdif-sound.stereo-fallback         Description: Built-in Audio Stereo         Driver: module-alsa-card.c         Sample Specification: s16le 2ch 44100Hz         Channel Map: front-left,front-right         Owner Module: 8         Mute: no         Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                 balance 0.00         Base Volume: 65536 / 100% / 0.00 dB         Monitor Source: alsa_output.platform-spdif-sound.stereo-fallback.monitor         Latency: 1985337 usec, configured 2000000 usec         Flags: HARDWARE DECIBEL_VOLUME LATENCY         Properties:                 alsa.resolution_bits = "16"                 device.api = "alsa"                 device.class = "sound"                 alsa.class = "generic"                 alsa.subclass = "generic-mix"                 alsa.name = ""                 alsa.id = "ff870000.spdif-dit-hifi dit-hifi-0"                 alsa.subdevice = "0"                 alsa.subdevice_name = "subdevice #0"                 alsa.device = "0"                 alsa.card = "1"                 alsa.card_name = "ROCKCHIP,SPDIF"                 alsa.long_card_name = "ROCKCHIP,SPDIF"                 device.bus_path = "platform-spdif-sound"                 sysfs.path = "/devices/platform/spdif-sound/sound/card1"                 device.form_factor = "internal"                 device.string = "hw:1"                 device.buffering.buffer_size = "352800"                 device.buffering.fragment_size = "176400"                 device.access_mode = "mmap+timer"                 device.profile.name = "stereo-fallback"                 device.profile.description = "Stereo"                 device.description = "Built-in Audio Stereo"                 module-udev-detect.discovered = "1"                 device.icon_name = "audio-card"         Ports:                 analog-output: Analog Output (priority: 9900)         Active Port: analog-output         Formats:                 pcm

Of course, all the sounds "es8316" / "hdmi" / "spdif" are working.
However, sadly, "mainline-kernel" has not yet implemented "video-accelerator" (mpp related),
it is not fun even if only the sound comes out.

So, I usually do not use "mainline-kernel".


RE: [SOLVED] No sound from phone-jack via "es8316" on rockpro64 - /dev/null - 11-10-2018

(10-26-2018, 05:46 AM)t4_4t Wrote: ...

Of course, all the sounds "es8316" / "hdmi" / "spdif" are working.
However, sadly, "mainline-kernel" has not yet implemented "video-accelerator" (mpp related),
it is not fun even if only the sound comes out.

So, I usually do not use "mainline-kernel".

So you mark it as "SOLVED". Could you kindly point us to the solution? Diffs or so... since that comes to modifying kernel source as you've mentioned.


RE: [SOLVED] No sound from phone-jack via &quot;es8316&quot; on rockpro64 - Bullet64 - 11-11-2018

Please make a 'Pull Request' so we all can hear something. Thanks.


RE: [SOLVED] No sound from phone-jack via "es8316" on rockpro64 - pragnesh - 11-25-2018

(10-26-2018, 05:46 AM)t4_4t Wrote: The problem of "es8316" is quite tough and can not be solved by only modifying "*.dts" or "kernel-config".

For example, your proposal is,
> So the question - how to sort the 1-0010 | gpio4-0 | ff880000.i2s conflict ?

If you fix it, you can surely see some improvement.
However, this kind of modification alone is not enough,
and only the effect of reducing errors from the "boot-log" is obtained.

In order for "es8316" to work correctly, both "dts" and "*.c source-code" modifications are necessary,
and the modification is more extensive (perhaps, more than you think).

"original-kernel (4.19.0-1073-ayufan)"
https://github.com/ayufan-rock64/linux-mainline-kernel/releases/download/4.19.0-1073-ayufan/linux-image-4.19.0-1073-ayufan-ga6e013135a6e_4.19.0-1073-ayufan_arm64.deb
Code:
$ uname -a Linux Rock64 4.19.0-1073-ayufan-ga6e013135a6e #1 SMP PREEMPT Tue Oct 23 09:19:54 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux [   16.057479] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010 [   16.059298] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22 [   16.060034] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk  on device rockchip-pinctrl [   16.061258] es8316 1-0010: Error applying setting, reverse things back [   16.062080] es8316: probe of 1-0010 failed with error -22 $ aplay -l aplay: device_list:270: no soundcards found... $ aplay -L default    Playback/recording through the PulseAudio sound server null    Discard all samples (playback) or generate zero samples (capture) pulse    PulseAudio Sound Server $ pactl list sinks Sink #0        State: IDLE        Name: auto_null        Description: Dummy Output        Driver: module-null-sink.c        Sample Specification: s16le 2ch 44100Hz        Channel Map: front-left,front-right        Owner Module: 10        Mute: no        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                balance 0.00        Base Volume: 65536 / 100% / 0.00 dB        Monitor Source: auto_null.monitor        Latency: 2213366 usec, configured 2000000 usec        Flags: DECIBEL_VOLUME LATENCY        Properties:                device.description = "Dummy Output"                device.class = "abstract"                device.icon_name = "audio-card"        Formats:                pcm

"original-kernel" with "modified-dts" (your proposal, perhaps what you tried to do)
Code:
$ uname -a Linux Rock64 4.19.0-1073-ayufan-ga6e013135a6e #1 SMP PREEMPT Tue Oct 23 09:19:54 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux [   10.538432] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1 [   10.539291] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack [   10.540228] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P [   10.540973] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P [   11.978401] es8316 1-0010: ASoC: Differential Mux DAPM update failed: -6 [   11.979565] es8316 1-0010: ASoC: Digital Mic Mux DAPM update failed: -6 [   13.149657] es8316 1-0010: ASoC: Differential Mux DAPM update failed: -6 [   13.151011] es8316 1-0010: ASoC: Digital Mic Mux DAPM update failed: -6 $ aplay -l **** List of PLAYBACK Hardware Devices **** [  280.461123] es8316 1-0010: No sysclk provided [  280.464960] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 ... [  280.507795] es8316 1-0010: No sysclk provided [  280.511685] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 card 0: rockchipes8316c [rockchip,es8316-codec], device 0: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 []   Subdevices: 1/1   Subdevice #0: subdevice #0 $ aplay -L [  347.616981] es8316 1-0010: No sysclk provided [  347.620827] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 ... [  347.663448] es8316 1-0010: No sysclk provided [  347.667337] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 default     Playback/recording through the PulseAudio sound server null     Discard all samples (playback) or generate zero samples (capture) pulse     PulseAudio Sound Server sysdefault:CARD=rockchipes8316c     rockchip,es8316-codec,     Default Audio Device dmix:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Direct sample mixing device dsnoop:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Direct sample snooping device hw:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Direct hardware device without any conversions plughw:CARD=rockchipes8316c,DEV=0     rockchip,es8316-codec,     Hardware device with all software conversions $ pactl list sinks [  129.097332] es8316 1-0010: No sysclk provided [  129.097841] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 ... [  129.110316] es8316 1-0010: No sysclk provided [  129.110825] es8316 1-0010: ASoC: can't open codec ES8316 HiFi: -22 Sink #0         State: IDLE         Name: auto_null         Description: Dummy Output         Driver: module-null-sink.c         Sample Specification: s16le 2ch 44100Hz         Channel Map: front-left,front-right         Owner Module: 11         Mute: no         Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                 balance 0.00         Base Volume: 65536 / 100% / 0.00 dB         Monitor Source: auto_null.monitor         Latency: 2216568 usec, configured 2000000 usec         Flags: DECIBEL_VOLUME LATENCY         Properties:                 device.description = "Dummy Output"                 device.class = "abstract"                 device.icon_name = "audio-card"         Formats:                 pcm


"my-kernel"
Code:
$ uname -a Linux Rock64 4.19.0-1073-ayufan-ga6e013135a6e #1 SMP PREEMPT Tue Oct 23 20:05:55 JST 2018 aarch64 aarch64 aarch64 GNU/Linux [    3.683845] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok [    3.684589] asoc-simple-card es8316-sound: ASoC: no DMI vendor name! [    3.691358] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok [    3.692034] asoc-simple-card spdif-sound: ASoC: no DMI vendor name! [    4.254556] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok [    4.255369] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name! [    4.500561] ALSA device list: [    4.500561]   #0: ROCKCHIP,ES8316 [    4.500561]   #1: ROCKCHIP,SPDIF [    4.500561]   #2: ROCKCHIP,HDMI $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ROCKCHIPES8316 [ROCKCHIP,ES8316], device 0: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 []   Subdevices: 1/1   Subdevice #0: subdevice #0 card 1: ROCKCHIPSPDIF [ROCKCHIP,SPDIF], device 0: ff870000.spdif-dit-hifi dit-hifi-0 []   Subdevices: 1/1   Subdevice #0: subdevice #0 card 2: ROCKCHIPHDMI [ROCKCHIP,HDMI], device 0: ff8a0000.i2s-i2s-hifi i2s-hifi-0 []   Subdevices: 1/1   Subdevice #0: subdevice #0 $ aplay -L default     Playback/recording through the PulseAudio sound server null     Discard all samples (playback) or generate zero samples (capture) pulse     PulseAudio Sound Server default:CARD=ROCKCHIPES8316     ROCKCHIP,ES8316,     Default Audio Device sysdefault:CARD=ROCKCHIPES8316     ROCKCHIP,ES8316,     Default Audio Device dmix:CARD=ROCKCHIPES8316,DEV=0     ROCKCHIP,ES8316,     Direct sample mixing device dsnoop:CARD=ROCKCHIPES8316,DEV=0     ROCKCHIP,ES8316,     Direct sample snooping device hw:CARD=ROCKCHIPES8316,DEV=0     ROCKCHIP,ES8316,     Direct hardware device without any conversions plughw:CARD=ROCKCHIPES8316,DEV=0     ROCKCHIP,ES8316,     Hardware device with all software conversions default:CARD=ROCKCHIPSPDIF     ROCKCHIP,SPDIF,     Default Audio Device sysdefault:CARD=ROCKCHIPSPDIF     ROCKCHIP,SPDIF,     Default Audio Device dmix:CARD=ROCKCHIPSPDIF,DEV=0     ROCKCHIP,SPDIF,     Direct sample mixing device dsnoop:CARD=ROCKCHIPSPDIF,DEV=0     ROCKCHIP,SPDIF,     Direct sample snooping device hw:CARD=ROCKCHIPSPDIF,DEV=0     ROCKCHIP,SPDIF,     Direct hardware device without any conversions plughw:CARD=ROCKCHIPSPDIF,DEV=0     ROCKCHIP,SPDIF,     Hardware device with all software conversions default:CARD=ROCKCHIPHDMI     ROCKCHIP,HDMI,     Default Audio Device sysdefault:CARD=ROCKCHIPHDMI     ROCKCHIP,HDMI,     Default Audio Device dmix:CARD=ROCKCHIPHDMI,DEV=0     ROCKCHIP,HDMI,     Direct sample mixing device dsnoop:CARD=ROCKCHIPHDMI,DEV=0     ROCKCHIP,HDMI,     Direct sample snooping device hw:CARD=ROCKCHIPHDMI,DEV=0     ROCKCHIP,HDMI,     Direct hardware device without any conversions plughw:CARD=ROCKCHIPHDMI,DEV=0     ROCKCHIP,HDMI,     Hardware device with all software conversions $ pactl list sinks Sink #0         State: IDLE         Name: alsa_output.platform-es8316-sound.stereo-fallback         Description: Built-in Audio Stereo         Driver: module-alsa-card.c         Sample Specification: s16le 2ch 44100Hz         Channel Map: front-left,front-right         Owner Module: 6         Mute: no         Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                 balance 0.00         Base Volume: 65536 / 100% / 0.00 dB         Monitor Source: alsa_output.platform-es8316-sound.stereo-fallback.monitor         Latency: 1896804 usec, configured 2000000 usec         Flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY         Properties:                 alsa.resolution_bits = "16"                 device.api = "alsa"                 device.class = "sound"                 alsa.class = "generic"                 alsa.subclass = "generic-mix"                 alsa.name = ""                 alsa.id = "ff890000.i2s-ES8316 HiFi ES8316 HiFi-0"                 alsa.subdevice = "0"                 alsa.subdevice_name = "subdevice #0"                 alsa.device = "0"                 alsa.card = "0"                 alsa.card_name = "ROCKCHIP,ES8316"                 alsa.long_card_name = "ROCKCHIP,ES8316"                 device.bus_path = "platform-es8316-sound"                 sysfs.path = "/devices/platform/es8316-sound/sound/card0"                 device.form_factor = "internal"                 device.string = "hw:0"                 device.buffering.buffer_size = "352800"                 device.buffering.fragment_size = "176400"                 device.access_mode = "mmap+timer"                 device.profile.name = "stereo-fallback"                 device.profile.description = "Stereo"                 device.description = "Built-in Audio Stereo"                 module-udev-detect.discovered = "1"                 device.icon_name = "audio-card"         Ports:                 analog-output-headphones: Headphones (priority: 9000)         Active Port: analog-output-headphones         Formats:                 pcm Sink #1         State: IDLE         Name: alsa_output.platform-hdmi-sound.stereo-fallback         Description: Built-in Audio Stereo         Driver: module-alsa-card.c         Sample Specification: s16le 2ch 44100Hz         Channel Map: front-left,front-right         Owner Module: 7         Mute: no         Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                 balance 0.00         Base Volume: 65536 / 100% / 0.00 dB         Monitor Source: alsa_output.platform-hdmi-sound.stereo-fallback.monitor         Latency: 1949733 usec, configured 2000000 usec         Flags: HARDWARE DECIBEL_VOLUME LATENCY         Properties:                 alsa.resolution_bits = "16"                 device.api = "alsa"                 device.class = "sound"                 alsa.class = "generic"                 alsa.subclass = "generic-mix"                 alsa.name = ""                 alsa.id = "ff8a0000.i2s-i2s-hifi i2s-hifi-0"                 alsa.subdevice = "0"                 alsa.subdevice_name = "subdevice #0"                 alsa.device = "0"                 alsa.card = "2"                 alsa.card_name = "ROCKCHIP,HDMI"                 alsa.long_card_name = "ROCKCHIP,HDMI"                 device.bus_path = "platform-hdmi-sound"                 sysfs.path = "/devices/platform/hdmi-sound/sound/card2"                 device.form_factor = "internal"                 device.string = "hw:2"                 device.buffering.buffer_size = "352800"                 device.buffering.fragment_size = "176400"                 device.access_mode = "mmap+timer"                 device.profile.name = "stereo-fallback"                 device.profile.description = "Stereo"                 device.description = "Built-in Audio Stereo"                 module-udev-detect.discovered = "1"                 device.icon_name = "audio-card"         Ports:                 analog-output: Analog Output (priority: 9900)         Active Port: analog-output         Formats:                 pcm Sink #2         State: IDLE         Name: alsa_output.platform-spdif-sound.stereo-fallback         Description: Built-in Audio Stereo         Driver: module-alsa-card.c         Sample Specification: s16le 2ch 44100Hz         Channel Map: front-left,front-right         Owner Module: 8         Mute: no         Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                 balance 0.00         Base Volume: 65536 / 100% / 0.00 dB         Monitor Source: alsa_output.platform-spdif-sound.stereo-fallback.monitor         Latency: 1985337 usec, configured 2000000 usec         Flags: HARDWARE DECIBEL_VOLUME LATENCY         Properties:                 alsa.resolution_bits = "16"                 device.api = "alsa"                 device.class = "sound"                 alsa.class = "generic"                 alsa.subclass = "generic-mix"                 alsa.name = ""                 alsa.id = "ff870000.spdif-dit-hifi dit-hifi-0"                 alsa.subdevice = "0"                 alsa.subdevice_name = "subdevice #0"                 alsa.device = "0"                 alsa.card = "1"                 alsa.card_name = "ROCKCHIP,SPDIF"                 alsa.long_card_name = "ROCKCHIP,SPDIF"                 device.bus_path = "platform-spdif-sound"                 sysfs.path = "/devices/platform/spdif-sound/sound/card1"                 device.form_factor = "internal"                 device.string = "hw:1"                 device.buffering.buffer_size = "352800"                 device.buffering.fragment_size = "176400"                 device.access_mode = "mmap+timer"                 device.profile.name = "stereo-fallback"                 device.profile.description = "Stereo"                 device.description = "Built-in Audio Stereo"                 module-udev-detect.discovered = "1"                 device.icon_name = "audio-card"         Ports:                 analog-output: Analog Output (priority: 9900)         Active Port: analog-output         Formats:                 pcm

Of course, all the sounds "es8316" / "hdmi" / "spdif" are working.
However, sadly, "mainline-kernel" has not yet implemented "video-accelerator" (mpp related),
it is not fun even if only the sound comes out.

So, I usually do not use "mainline-kernel".

I understand, i need to modify sound/soc/codecs/es8316.c 
Can you tell me which other files i need to modify?

Can you share your asound.rc file?